Shogun breather help please
#1
Member
JUNIOR BUILDER
Thread Starter
Join Date: Aug 2004
Posts: 96
Shogun breather help please
I have shogun breathers and the balls are missing after sitting in garage for a few months so now I need to figure out what size they were and what they were made of so I can find some and replace them so any help would be great
#4
Senior Member
DYNO OPERATOR
Join Date: Jan 2004
Location: central Illinois
Posts: 459
shogan
When you find the size, check out McMaster Carr industrial catalog or online. I have purchased balls from them in standard and metric.
If you can't find something odd anywhere else, they sell everything.
Even RONS INJECTION gold fuel pumps if you know what size. Look under beverage pumps.
Their a little high sometimes, but as a last resort.
If you can't find something odd anywhere else, they sell everything.
Even RONS INJECTION gold fuel pumps if you know what size. Look under beverage pumps.
Their a little high sometimes, but as a last resort.
#5
Pretty sure they are 3/4". A friend of mine had some and I took them and measured them and made a few sets for me and a couple friends. They had 3/4" balls in them. I started out using hollow aluminum balls then went to Delrin.
Curtis
Curtis