Results 1 to 5 of 5

Thread: Need help setting up track bar (sportsman tube chassis)

  1. #1

    Need help setting up track bar (sportsman tube chassis)

    I bought the car and the ladder bar rear end was already set up. everything but the track bar. I thought about wish bone or x bar but i still got motor,tranny and odds and ends to go.Any help will be appreciated.

  2. #2
    Senior Member DYNO OPERATOR
    Join Date
    Aug 2007
    Lost Creek, WV
    If you are referring to the diagonal link, you adjust it so the rear end is centered in the chassis.


  3. #3
    Do i install the track bar (diagonal Link) first or square the rear to the chassis then install the track bar

  4. #4
    got it.

  5. #5
    Junior Member APPRENTICE
    Join Date
    May 2003
    Broad Brook,CT.
    Quote Originally Posted by rickycampbell
    got it.
    I believe you want 1/2 the amount of total thread sticking out on each end. The other half will be threaded in the diginal link. And yes i would try and square and center as close as you can,. then connect dig. link. Dont forget to set pinion angle(get as close as you can) once motor & trans. in you can readjust.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Copyright © 2005-2016 MH Sub I, LLC dba Internet Brands All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy