BEWARE SCAMMERS IN REIDSVILLE NC
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Dec 2009
Posts: 2
BEWARE SCAMMERS IN REIDSVILLE NC
Took my car to get some work done to R AND D Race cars in Reidsville NC and they kept my car forever and gave me a outrageous bill that I paid in full. 5 years into this and my car is not finish and the work thats been done looks like shit. Now the refused to finish the work and I had to take matters to a higher level. Beware of these scammers!!!!!!!!!
#3
Junior Member
SHOW GUEST
Thread Starter
Join Date: Dec 2009
Posts: 2
Re: BEWARE SCAMMERS IN REIDSVILLE NC
Originally Posted by a2180turbo
Took my car to get some work done to R AND D Race cars in Reidsville NC and they kept my car forever and gave me a outrageous bill that I paid in full. 5 years into this and my car is not finish and the work thats been done looks like s. Now the refused to finish the work and I had to take matters to a higher level. Beware of these scammers!!!!!!!!!
yes they are a Racing Junk Member
#6
Give us the names etc...or copy and paste member thread...thanks
on a personal Note I swear to GAWD if I ever needed chassis work done again that's considered major I will buy a 220 miller and go at it and screw it up enough until its right..or buy someones else stuff.
Screw these Rip Off Chassis builders prices..I know it takes talent and its work WHEN YOU WORK..Trust me there is a bunch of DOWN time I have whitnessed from many reputable and Non Reputable chassis builders and you are getting charged for...if you can Measure , have a decent mechanical mind and the tools you can do most of your own stuff...
Three golden Rules to Follow:
1- Don't Cut it too short
2- remember its only metal you can grind it off and start over.
3- Be patient
If you have never welded before and no one around to show you..take a 6 week night/weekend welding certificate course at a local tech school you will have enough to go from there....
on a personal Note I swear to GAWD if I ever needed chassis work done again that's considered major I will buy a 220 miller and go at it and screw it up enough until its right..or buy someones else stuff.
Screw these Rip Off Chassis builders prices..I know it takes talent and its work WHEN YOU WORK..Trust me there is a bunch of DOWN time I have whitnessed from many reputable and Non Reputable chassis builders and you are getting charged for...if you can Measure , have a decent mechanical mind and the tools you can do most of your own stuff...
Three golden Rules to Follow:
1- Don't Cut it too short
2- remember its only metal you can grind it off and start over.
3- Be patient
If you have never welded before and no one around to show you..take a 6 week night/weekend welding certificate course at a local tech school you will have enough to go from there....
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "