help
#1
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Mar 2009
Location: kingsport tn
Posts: 1,729
help
ok on my wagon it has a lil 3.8 with the dual jet ( 1/2 a quadra jet) what other 2 barrel vard will bolt up? this thing is a pos on its last leg and dont wanna rebuild it cause to put and aftermarket air cleaner i have to have a hard to find special adapter. any help would be helpful
#7
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Mar 2009
Location: kingsport tn
Posts: 1,729
lol fast but in my opinion 600 cfm 4 barrel would be way too much over kill for a stock 3.8 heck 500 cfm probably too big figure a lil 350 cfm should work but need to know if itll bolt up. can get get a remaned dual jet for like 200 buti would be back to searching for an adapter.
#8
Check this place out; scroll down the home page and see what they've got within the website;
http://www.carburetion.com/index.htm
More here;
http://www.carburetorsandmore.com/
And adapters here with measurements;
http://www.summitracing.com/search/?...=carb+adapters
http://www.carburetion.com/index.htm
More here;
http://www.carburetorsandmore.com/
And adapters here with measurements;
http://www.summitracing.com/search/?...=carb+adapters