problems...

Old 05-01-2012, 01:27 PM
  #1  
devil427
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Feb 2006
Posts: 5
Default problems...

HI EVERYBODY ,

I'm a newbie on this forum , but RJ addict for a long time , i'm a french dragracer / mecanic .
Today , i came here because i'm a bit in trouble with a RJ advertiser .. :x
I did bought an old style RYR engine from K HUNTINGTON , in NC , the problem is that i 'll not receive exactely what advertised .. promised ..
and i did pay a lot for that .. :?
If anyone on this forum do personnaly know him , please could you ask him to respect his deal ...
Thanks
JOSE from FRANCE, sorry for my poor english
devil427 is offline  
Old 05-01-2012, 05:04 PM
  #2  
TheRabbit
Senior Member
RACING JUNKIE
 
TheRabbit's Avatar
 
Join Date: Jan 2007
Location: Augusta, Ga.
Posts: 2,276
Default Re: problems...

Originally Posted by devil427
HI EVERYBODY ,

I'm a newbie on this forum , but RJ addict for a long time , i'm a french dragracer / mecanic .
Today , i came here because i'm a bit in trouble with a RJ advertiser .. :x
I did bought an old style RYR engine from K HUNTINGTON , in NC , the problem is that i 'll not receive exactely what advertised .. promised ..
and i did pay a lot for that .. :?
If anyone on this forum do personnaly know him , please could you ask him to respect his deal ...
Thanks
JOSE from FRANCE, sorry for my poor english
Welcome to the forum Jose.
Sorry your first post is about a possible scam.

Can you give us an add #?
Do you have any emails between the two of you about the engine?
TheRabbit is offline  
Old 05-01-2012, 06:24 PM
  #3  
lively
Senior Member
RACING JUNKIE
 
lively's Avatar
 
Join Date: Nov 2004
Location: ILLINOIS
Posts: 2,190
Default

MORE INFO---THANKS 8)
lively is offline  
Old 05-01-2012, 07:18 PM
  #4  
TheYellaBrick
Senior Member
RACING JUNKIE
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default

Jose,
One thing that we do pretty well here is get to the bottom of deals that have gone bad. There are some really good detective types here !

As already said, we'll need all your emails between you two, the ad number, and all details of the deal from start to present.

First off, exactly when and how did you pay for the part, and when were you supposed to receive the merchandize ?

Secondly, transfer this discussion on up to the User Feedback and Scammers section. It is dedicated to just this type of problem.

Welcome aboard from across the pond ! Post up some pics of your prjects if ya can. We like shiny thing that move !
TheYellaBrick is offline  
Old 05-01-2012, 11:25 PM
  #5  
devil427
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Feb 2006
Posts: 5
Default problems

HI THERE ,

Thanks for your help ..
here's a copy of our first emails , with ad number and K HUNTINGTON PH number.., in his lastest email , yesterday night , he says he dont want to hear no more about this .. :evil:
the problem is that i miss : the starter , the manifold extension , the aluminium extention that drive the oil pump , the alternator ...etc
I've paid for a complete engine as pictured..
I dont know how to deplace this discussion towards scammer section , can you help ? :roll:
Thanks , JO
i've tried to insert a pics ..but cannot

> > > > > > > > > > > On [2012-01-06 08:28:42] rocketman4parts wrote:
> > > > > > > > > > > > Hi Jo,
> > > > > > > > > > > > So what did you decide on the Ford Nascar engine? Kurt
Huntington call if you want to talk about it. 704-278-3222
> > > > > > > > > > > > North Carolina. USA
> > > > > > > > > > > >
> > > > > > > > > > > > On [2012-01-03 18:24:44] devil427 wrote:
> > > > > > > > > > > > > Hello KURT ,
> > > > > > > > > > > > > Thanks for your fast reply , need MORE INFO : what svo
block is it : what's the part number ? never repaired ? sleeved ?? what is the
bolt pattern ? 351C ? 302 SBF ?
> > > > > > > > > > > > > what kind of transmissions fit behind the block ?
> > > > > > > > > > > > > what's the splines number for the clutch ?
> > > > > > > > > > > > > is the crank std size ?
> > > > > > > > > > > > > what kind of water pump , timing gear ?
> > > > > > > > > > > > > I really do need more pics , CLOSER , can you remove a
valve cover ?
> > > > > > > > > > > > > AND : WHAT WILL BE YOUR LAST ( bottom) PRICE ,,,?
> > > > > > > > > > > > > can you ask about shipping cost ? may be GLOBAL AIR
FREIGHT ?
> > > > > > > > > > > > > I know ...........: this is a lot of questions , but i
cannot buy an engine with only 2 pics , i'm sure you do understand .
> > > > > > > > > > > > > last question : if we do made the deal , how would you
like to be paid ?
> > > > > > > > > > > > > waiting for your answer /pics by mail
> > > > > > > > > > > > > i dont know personnaly vincent Sarlin , but have seen
nice videos of his car .great running engine..
> > > > > > > > > > > > > best regards JO
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > On [2012-01-02 11:23:15] rocketman4parts wrote:
> > > > > > > > > > > > > > Hi Jo,
> > > > > > > > > > > > > > I can send it anywhere you want air frt. Vincent
Sarlin has one of my SB2 engines in a corvette over there. The Yates engine is a
4.140 bore X 3.290 stroke 357 inch. It has a comp roller, SVO ford race
block,Bryant crank, Lentz or carrillo rods( i don't remember which)J&E pistons
with a 11.9 comp ratio.C-3 Ford Yates heads with titanium valves, T&D rockers a
billet front cover and barnes 5 stg drysunp oil system. It has a clutch ( tilton
7.25 triple disc) and a moroso dual pickup distributor.Yates ported Ford
motorsports intake.Ready to run approx 800 hp, Thanks,Kurt Huntington
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > On [2012-01-02 10:50:06] devil427 wrote:
> > > > > > > > > > > > > > > Good morning SIR ,
> > > > > > > > > > > > > > > I'm JO from France , and i could be interested in
your engine , i need to know first if you could ship it to France via airfreight
?
> > > > > > > > > > > > > > > if yes , please could you give me more info about
the engine : what kind of block is it : Dart ? , heads ? valve train ?
crankshaft , rods , oil system , bolt pattern of the block , clutch ? etc ????
and some more detailled pics .
> > > > > > > > > > > > > > > My email is : [email protected]
> > > > > > > > > > > > > > > i'm serious , this is not a "joke" from africa or
other exotic coutries
> > > > > > > > > > > > > > > i cannot call cause my spoken english is very bad
, hope you can read me ..
> > > > > > > > > > > > > > > Best regards , JO
> > > > > > > > > > > > > [/img]
devil427 is offline  
Old 05-02-2012, 01:49 AM
  #6  
fast75vega
Senior Member
RACING JUNKIE
 
Join Date: Nov 2008
Location: Niagara Falls, NY
Posts: 965
Default

jo, we need the AD number from RJ..... so we can see and read his AD to know what was and was not included!!
fast75vega is offline  
Old 05-02-2012, 03:16 AM
  #7  
devil427
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Feb 2006
Posts: 5
Default problems

the ad number is :

Date: 2012-01-19 16:55:38
Ad: #2420397
Status: Read
Subject: Re: Yates RYR 358 inch Nascar Ford engine

may be too old to be seen .
i've tried to post a picture that was in the ad , but dont know how to do ... ops:

JO[/url]
devil427 is offline  
Old 05-02-2012, 03:21 AM
  #8  
devil427
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Feb 2006
Posts: 5
Default problems

i did find a way to post a pics :

http://imageshack.us/photo/my-images...undefined.jpg/

this is the pic of the engine advertised

got this except for : the right ford starter , the alternator , the manifold extension , etc

JO
devil427 is offline  
Old 05-02-2012, 08:39 AM
  #9  
TheRabbit
Senior Member
RACING JUNKIE
 
TheRabbit's Avatar
 
Join Date: Jan 2007
Location: Augusta, Ga.
Posts: 2,276
Default

This is the pic from the link provided.


TheRabbit is offline  
Old 05-02-2012, 12:32 PM
  #10  
devil427
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Feb 2006
Posts: 5
Default problems

Thanks RABBIT !

JO
devil427 is offline  

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -