fuel pump gph

Old 04-16-2012, 04:10 PM
  #1  
hotrod1994
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
Default fuel pump gph

hey guys i have a mild 350
9.5:1
477/477 lift 268/268 duration cam
stock heads milled to get 9.5:1
Holley 600
edelbrok torker intake

what gallons per hour at what psi should i run?

im looking for mechanical fuel pump that dosen't need a regulator at a good price so what kind of gallons per hour at what psi should i look for

thanks guys
hotrod1994 is offline  
Old 04-16-2012, 10:12 PM
  #2  
bluedawg357
Member
CRAFTSMAN
 
Join Date: Dec 2010
Location: anchorage alaska
Posts: 56
Default

I'm running a 110 gph on my 400 sbc, and ran the stock gm on my 350 with a slightly larger cam with edelbrock heads, so I would say a stock gm would work just fine. Just my .02$
bluedawg357 is offline  
Old 04-17-2012, 09:02 AM
  #3  
hotrod1994
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
Default

ok i was thinking of running one that was equivalent to a more performance sbc from the early 70's the motor is in a 76 camaro
hotrod1994 is offline  
Old 05-25-2012, 05:28 AM
  #4  
Notalent
Member
MASTER JOURNEYMAN
 
Join Date: Dec 2007
Location: Grand Prairie, Texas
Posts: 36
Default

You can get away with an 80GPH or 110GPH and have it set at about 5.5 PSI. The Holley 12-834 or 12-327-11 will be a great option and wont break the bank and no need for a regulator, but it IS suggested...you want to know whats going on and just because these pumps come preset, does not mean they are putting out that much PSI. It could be more or less.
Notalent is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -