What will it run?????

Old 03-14-2012, 05:58 PM
  #1  
SPEEDNEEDS1
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: May 2006
Location: Pikeville KY
Posts: 109
Default What will it run?????

I have a 225 hardtail dragster, 540 Merlin III heads, 14.5 comp. .817-.793 7/4 swap 284-292 @0.50, 6000 stall hughes converter, 4.10 gear, 15x33 tire 1150 APD alky carb. Car will be used mostly for 1/8 mile.
SPEEDNEEDS1 is offline  
Old 03-14-2012, 07:19 PM
  #2  
RonOwensRacing
Senior Member
DYNO OPERATOR
 
Join Date: Oct 2004
Location: florence ky
Posts: 498
Default

I think it will be 4.90"s to 5.0's
Maybe some mid to high 80's depending how good the heads are.
RonOwensRacing is offline  
Old 03-15-2012, 05:23 AM
  #3  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default Re: What will it run?????

Originally Posted by SPEEDNEEDS1
I have a 225 hardtail dragster, 540 Merlin III heads, 14.5 comp. .817-.793 7/4 swap 284-292 @0.50, 6000 stall hughes converter, 4.10 gear, 15x33 tire 1150 APD alky carb. Car will be used mostly for 1/8 mile.
4.80s hardtail with a front suspension, car cant weigh a lot.

I do think a good change later on is a set of dart 355 heads for it.
hammertime is offline  
Old 03-15-2012, 04:58 PM
  #4  
SPEEDNEEDS1
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: May 2006
Location: Pikeville KY
Posts: 109
Default

Thanks for the replies, I am hoping for 4.90's. I agree with the head change, the Merlin's look good though, John at APD done a valve job, and some bowl blend work on the heads a couple of weeks ago and he said they should have no problem making 850-875. I am planning to switch to a set of Head Hunters and make it a 582 if everything works out with it this summer. Thanks Allen
SPEEDNEEDS1 is offline  
Old 03-16-2012, 05:16 AM
  #5  
roadkill2
Senior Member
RACING JUNKIE
 
Join Date: Jan 2012
Posts: 628
Default

I'm with hammertime . . unless the car's a leadsled, it ought to run 4,80's in respectable air . .
roadkill2 is offline  
Old 03-16-2012, 05:47 PM
  #6  
SPEEDNEEDS1
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: May 2006
Location: Pikeville KY
Posts: 109
Default

Hope to test at London dragway next weekend if I get my trans. done and have no unexpected problems. I will post results as soon as I get them!!
SPEEDNEEDS1 is offline  
Old 03-31-2012, 03:00 AM
  #7  
SPEEDNEEDS1
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: May 2006
Location: Pikeville KY
Posts: 109
Default

Off to London Dragway today, I will post results tonight when I get home. I am going to say 4.95, it is supposed to be 85 degrees here today and this is only the second weekend on the race track, so it may not be up to par yet....
SPEEDNEEDS1 is offline  
Old 03-31-2012, 07:57 PM
  #8  
SPEEDNEEDS1
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: May 2006
Location: Pikeville KY
Posts: 109
Default

It ran [email protected]
1.08 5
3.14 8
4.88 0
141.00

Car ran great, no issues at all. However it was really inconsistant. Ran within 3 hundreths every pass, but was up and down .03. It was all in 60ft/330. It only moved .004 from 330 to 1/8 mile all day.

Had a tire issue with my C07 15x33's (screw in 1 tire) so I put a set of 15x55 D05's on and I don't think it likes them. Car is dead hooked about 20ft and then shakes the hell out of them for another 20 ft. Track was good as no one else was having problems.
SPEEDNEEDS1 is offline  
Old 04-01-2012, 07:20 AM
  #9  
SPEEDNEEDS1
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: May 2006
Location: Pikeville KY
Posts: 109
Default

so I put a set of 15x55 D05's

Sorry for typo. I put 15x33 D05's on it.
SPEEDNEEDS1 is offline  
Old 04-01-2012, 07:52 AM
  #10  
roadkill2
Senior Member
RACING JUNKIE
 
Join Date: Jan 2012
Posts: 628
Default

Originally Posted by roadkill2
I'm with hammertime . . unless the car's a leadsled, it ought to run 4,80's in respectable air . .
See, us old guys aren't always wrong . . .

Good job. And it'll get better . . .
roadkill2 is offline  

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -