Results 1 to 7 of 7

Thread: Fuel pump doesent seem to fit???

  1. #1
    Senior Member SENIOR BUILDER
    Join Date
    May 2006
    Location
    Pikeville KY
    Posts
    109

    Fuel pump doesent seem to fit???

    I installed my engine today, BBC 540 with ron's 0 1/2 pump. No matter how I install pump, it just does not look right. Are the fittings supposed to be pointing up or down? I am going to run a carb to start with being so new to alky. my pump is gold, black bracket pump bolts to is a 8501-A and another bracket bolted to it that is a 8506. I need help, or maybe a pic of someone's on there motor??? Thanks for any help.
    OSCA PROSTREET CHAMPION 2006
    [email protected] 1.13 ALL AT 3200LBS

    2009 PRO STREET CHAMPION LONDON DRAGWAY 4.69 @153.00 3200LBS

    2011 LONDON DRAGWAY RECORD HOLDER IN PRO STREET 4.66 @153.00

  2. #2
    Senior Member DYNO OPERATOR
    Join Date
    Jan 2004
    Location
    central Illinois
    Posts
    459

    fuel pump

    killerrons.com

    AKA James Monroe

  3. #3
    Senior Member SENIOR BUILDER
    Join Date
    May 2006
    Location
    Pikeville KY
    Posts
    109
    I looked on their site and really cant make heads or tails of their diagram. I hate to sound so dumb, but my pump does not look like the one on the diagram??? Pump say's Ron's right on it.
    OSCA PROSTREET CHAMPION 2006
    [email protected] 1.13 ALL AT 3200LBS

    2009 PRO STREET CHAMPION LONDON DRAGWAY 4.69 @153.00 3200LBS

    2011 LONDON DRAGWAY RECORD HOLDER IN PRO STREET 4.66 @153.00

  4. #4
    Senior Member DYNO OPERATOR
    Join Date
    Jan 2004
    Location
    central Illinois
    Posts
    459

    Fuel pump

    You have a private message. Look near the top of the page.

  5. #5
    Senior Member SENIOR BUILDER
    Join Date
    May 2006
    Location
    Pikeville KY
    Posts
    109
    I drilled a new hole in my front plate to make everything work out and look right. Thanks for the help. Allen
    OSCA PROSTREET CHAMPION 2006
    [email protected] 1.13 ALL AT 3200LBS

    2009 PRO STREET CHAMPION LONDON DRAGWAY 4.69 @153.00 3200LBS

    2011 LONDON DRAGWAY RECORD HOLDER IN PRO STREET 4.66 @153.00

  6. #6
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    Location
    La.
    Posts
    2,890
    The newer pumps have a slip collar where you can rotate them to any position, i personally don't run Rons pumps, i run DSR pumps, but everyone now makes the slip collar pump.

    Zip.

  7. #7
    Senior Member SENIOR BUILDER
    Join Date
    May 2006
    Location
    Pikeville KY
    Posts
    109
    Thanks Zip, I have a older pump, I think I may have to upgrade later in the season.
    OSCA PROSTREET CHAMPION 2006
    [email protected] 1.13 ALL AT 3200LBS

    2009 PRO STREET CHAMPION LONDON DRAGWAY 4.69 @153.00 3200LBS

    2011 LONDON DRAGWAY RECORD HOLDER IN PRO STREET 4.66 @153.00


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy