Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: SBC Spreadport headers for 67 CHEVY II

  1. #1
    Senior Member MASTER BUILDER
    Join Date
    Jan 2007
    Location
    Shelbyville Indiana
    Posts
    139

    SBC Spreadport headers for 67 CHEVY II

    Any suggestions? Has a Heidts front clip with 26" between frame rails and a rack. Been looking for a month without alot of luck.
    Hedman makes a #65023 thats says its for a 67-69 Camaro but i found them doing a ChevyII search on their site.

  2. #2
    Senior Member DYNO OPERATOR
    Join Date
    Jan 2004
    Location
    central Illinois
    Posts
    459

    SBS spreadport

    You have a new private message. Look at the top of the page.

  3. #3
    Senior Member DYNO OPERATOR
    Join Date
    Apr 2008
    Posts
    496
    lemons headers

  4. #4
    Senior Member MASTER BUILDER
    Join Date
    Jan 2007
    Location
    Shelbyville Indiana
    Posts
    139

    Re: SBS spreadport

    Quote Originally Posted by markdunlap
    You have a new private message. Look at the top of the page.
    THANKS

  5. #5
    Senior Member MASTER BUILDER
    Join Date
    Jan 2007
    Location
    Shelbyville Indiana
    Posts
    139
    Quote Originally Posted by JEFF69Z28
    lemons headers
    I was just looking for an off The shelf Header trying to save time and money

  6. #6
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    Location
    La.
    Posts
    2,890
    I'm thinking you will have to get fenderwell headers if you want off the shelf. It's hard to get under the frame headers inside a 26" W frame, plus starter interferrance problems. Maybe some S10/sm/blk conversion headers. Hooker makes some fenderwell headers that are 1 7/8" or 2" i think. But they are like $500.00

    Zip.

  7. #7
    Senior Member MASTER BUILDER
    Join Date
    Jul 2006
    Posts
    184
    Spread Port, meaning like a bigchief style head? If so, good luck. You will need customs. Possibly Lemons has something.

    Frank

  8. #8
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    Location
    La.
    Posts
    2,890
    Quote Originally Posted by Pwmax
    Spread Port, meaning like a bigchief style head? If so, good luck. You will need customs. Possibly Lemons has something.

    Frank
    He's talking about the heads with Stahl bolt pattern instead of the straight line on most 23* heads.
    I THINK.

    Zip.

  9. #9
    Senior Member MASTER BUILDER
    Join Date
    Jan 2007
    Location
    Shelbyville Indiana
    Posts
    139
    Yep,the Stahl 7 bolt,bolt pattern. I found some Hedman 65023's when i was on Hedmans website searching for ChevyIIs but when i clicked on them it said they were for 67-69 Camaro???? Their $686 through Jegs uncoated,thats the cheapest ive found,Stahls are $1125 and Lemons$1500

  10. #10
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    Location
    La.
    Posts
    2,890
    Quote Originally Posted by ImBack
    Yep,the Stahl 7 bolt,bolt pattern. I found some Hedman 65023's when i was on Hedmans website searching for ChevyIIs but when i clicked on them it said they were for 67-69 Camaro???? Their $686 through Jegs uncoated,thats the cheapest ive found,Stahls are $1125 and Lemons$1500
    Did you look at the S10/sm/blk conversion fenderwell headers :?: I know they will clear your narrow frame.


    Yep i have a set of Lemon's build for a 1980 Malibu under the chassis (2" to 2 1/8" step) the guy i bought them from paid $1350.00 plus $150.00 for the 8 EGT bungs

    Zip.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy