Results 1 to 6 of 6

Thread: Brodix 10x heads

  1. #1
    Senior Member MASTER BUILDER
    Join Date
    Aug 2007
    Location
    Iowa - USA
    Posts
    218

    Brodix 10x heads

    Do these heads require shaft rockers or can stud rockers be used?

  2. #2
    Senior Member DYNO OPERATOR
    Join Date
    Aug 2007
    Location
    Lost Creek, WV
    Posts
    533
    They require shaft rockers plus offset lifters too.

    TS1955

  3. #3
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    Location
    La.
    Posts
    2,890
    Quote Originally Posted by TS1955
    They require shaft rockers plus offset lifters too.

    TS1955
    X2, they require .250 offset rockers and .180 offset int. lifters. I have a set on my injected 434". They are Brodix 10's with RP's and FP's. I have T&D's i could look up the PN# if you need it. When i was setting mine up i called Brodix and they wouldn't give me the answer, they just said send us the heads and we'll set them up, yah right :!: :!: (NOT), since they are dealers of all the shaft rockets. I had a friend with set of .250 offset 1.6's T&D's which he sent me if they would work i could have them for $600.00, they were perfect. Problem is that they are the best 23* heads out there, they only flow about 320 CFM fully ported mine flow 314 @ .600 lift where the AFR 235's flow more fully ported.

    Zip.


  4. #4
    Senior Member MASTER BUILDER
    Join Date
    Aug 2007
    Location
    Iowa - USA
    Posts
    218
    The reason I ask is I have a set of AllPro 220's that require shaft rockers. I also have ss rockers on my really old set of Brodix heads. I was thinking of buying the 10x if I didn't have to by the shaft rockers and new lifters. This hobby is getting really expensive. Current engine is little m 406.

  5. #5
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    Location
    La.
    Posts
    2,890
    Quote Originally Posted by jreiley
    The reason I ask is I have a set of AllPro 220's that require shaft rockers. I also have ss rockers on my really old set of Brodix heads. I was thinking of buying the 10x if I didn't have to by the shaft rockers and new lifters. This hobby is getting really expensive. Current engine is little m 406.
    The set of Brodix 10's that i have are the older version, i really don't know if the 10 X's have the same valve layout, but i can tell you that you will not get a straight answer from Brodix.

    Zip.

  6. #6
    Senior Member DYNO OPERATOR
    Join Date
    Apr 2008
    Posts
    496
    [quote="zipper06"]
    Quote Originally Posted by TS1955
    They require shaft rockers plus offset lifters too.

    TS1955
    X2, they require .250 offset rockers and .180 offset int. lifters. I have a set on my injected 434". They are Brodix 10's with RP's and FP's. I have T&D's i could look up the PN# if you need it. When i was setting mine up i called Brodix and they wouldn't give me the answer, they just said send us the heads and we'll set them up, yah right :!: :!: (NOT), since they are dealers of all the shaft rockets. I had a friend with set of .250 offset 1.6's T&D's which he sent me if they would work i could have them for $600.00, they were perfect. Problem is that they are the best 23* heads out there, they only flow about 320 CFM fully ported mine flow 314 @ .600 lift where the AFR 235's flow more fully ported.

    Zip.

    [/quote
    Zip how long are those header studs?


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy