Results 1 to 9 of 9

Thread: 33 spline-Strange and Mosier

  1. #1
    Junior Member SHOW GUEST
    Join Date
    Mar 2010
    Posts
    1

    33 spline-Strange and Mosier

    I bought a new 9" center with a 33 spline spool from Strange. I have 33 spline Mosier axles. Somebody at the track told me that the Mosier and Strange have differences in the 33 spline arrangement that make them non compatible. Is that true?

  2. #2
    Senior Member DYNO OPERATOR
    Join Date
    Oct 2004
    Location
    florence ky
    Posts
    498
    Some of them have a rounded spline and the others are flat spline i think the moser is flat and the strange is rounded can't remember for sure.

  3. #3
    Senior Member RACING JUNKIE TheRabbit's Avatar
    Join Date
    Jan 2007
    Location
    Augusta, Ga.
    Posts
    2,295
    I've always heard to run same brand axle and spool.

  4. #4
    Senior Member MASTER BUILDER
    Join Date
    Jan 2008
    Location
    Yooper
    Posts
    168
    They will fit in one another but there is a different pitch on the splines I just run into that same deal I have 40 spline strange axles and a mosier spool it was little tight goin together. I now have everthing strange, went together like butter. Apparently got to be manufacturer loyal!

  5. #5
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Location
    Coldwater, MI
    Posts
    2,998
    Yes you have to tell Moser your running strange axles, they can accomdate the change,
    David Lanning
    IHRA NHRA 387B

    Fleenor Racing Transmission
    419-280-1406
    Lanning Electric
    Complete Drag Car Wiring
    APD Race Engines
    www.apdracing.com

  6. #6
    Junior Member APPRENTICE
    Join Date
    May 2003
    Location
    Broad Brook,CT.
    Posts
    23

    axles &spool

    I have a question - Im building a tube chassis 68 camaro,fiberglass nose-doors drunk lid and lexan windows so ,Should i go with 35 or 40 spline on axles. I believe the car should be running somewhere in low 9s to hi 8s(im hoping)lol

  7. #7
    Senior Member MASTER BUILDER
    Join Date
    Jan 2008
    Location
    Yooper
    Posts
    168

    Re: axles &spool

    Quote Originally Posted by injectedrat68
    I have a question - Im building a tube chassis 68 camaro,fiberglass nose-doors drunk lid and lexan windows so ,Should i go with 35 or 40 spline on axles. I believe the car should be running somewhere in low 9s to hi 8s(im hoping)lol
    if your willing to spend the extra few bucks on the difference in spools I would go with the 40's. always nice to leave room for serious hp down the road. But 35's would be fine, keep in mind that 40 spline axles just really started coming out a handfull of years ago. IMO

  8. #8
    Junior Member APPRENTICE
    Join Date
    May 2003
    Location
    Broad Brook,CT.
    Posts
    23

    axles &spool

    Ya, thats what i thought. I think if i go any faster ill go with the 40.Anyway this car is more like pro street so the next step would prob. buy a top sportsman. Thank for the reply.

  9. #9
    Senior Member RACING JUNKIE
    Join Date
    Sep 2007
    Location
    Montvale, VA
    Posts
    1,431
    Different companies use different pressure angles on their axles and spools. I know that you already know that,but who knows if they ever decide to change them or not. A quick call to the people that made your spool would be FREE insurance. I'd just call them and then you'll have no worries.
    "The problem with quotes on the Internet is that you cannot confirm their validity"- Abraham Lincoln


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy