rocker arm ratio
#2
Senior Member
RACING JUNKIE
Join Date: Nov 2008
Location: Niagara Falls, NY
Posts: 965
just install them and the push rods... then turn it over by hand to check clearances to make sure your not bottoming out the valve/springs. might have to change push rod length pending on cam size
#4
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
and is it worth the extra ratio it will be a 355 with 10:1 c comp 294s soild cam pro comp aluminum heads hurricane intake and a holley 750 looking to get 450 out of it
comp cams cam quest said 500 hp with the combination and that cam
comp cams cam quest said 500 hp with the combination and that cam