Results 1 to 3 of 3

Thread: 1000 HP ? second opinion please

  1. #1
    Junior Member SHOW GUEST
    Join Date
    Jan 2010
    Location
    Southampton UK
    Posts
    8

    1000 HP ? second opinion please

    Hi after peoples thoughts on a 440 allready blown BDS 871 engine having the following added when rebuilding, i am looking to make around the 1000 hp mark.
    440-H1-1 heads bare--Indy
    440-R4-10 External oil kit
    OPT-H01-A Std shaft mount
    MPI-V1-440-1I 2.190" Inlet valves x 8
    MPI-V1-440-1E 1.810" Exhaust valves x 8
    ALL-S2-K950 K motion valve springs
    ALL-L3-611-1 10 Deg valve locks
    ALL-R1-732T 10 Deg valve caps
    ALL-V3-529V Viton valve seals
    440-V5-6 Valley cover plate
    440-I4-20 Blower manifold
    440-R4-4-1.5 rocker arms
    440-R4-11 Rocker studs
    440-R4-14 Rocker shafts
    440-P5-9K Push rods
    440-H3-16 head bolt set
    Eagle forged stroker crank 4.375" stroke
    H-beam conrods 7.1"
    JE Blower forged pistons
    Total seal rings
    Cam bearings
    ARP main studs
    Main bearings
    Rod bearings
    Oil pump
    oil pump drive shaft
    and trans

    TF727 with 5 plate clutchs,
    Billit Fwd drum & input shaft.
    Rev shift patten trans brake.
    Ridgid front band
    5.0 ratio band apply lever
    Deep alloy Sump pan kit
    Alloy direct clutch drum kit
    Rear support kit with roller bearings
    Super Spragg
    4 pinion gearsets

    well this is what i am being recomended and as i am spending a fare amount i would be very interested in replies
    Thanks
    Richard

  2. #2
    Senior Member MASTER BUILDER
    Join Date
    Apr 2003
    Location
    Brookings South Dakota
    Posts
    244
    How fun, we built this same engine 2 years ago. We would be more than happy to go over the list and get you the correct parts to build that power reliably.
    Competition Engines & Hardcore Engine Parts
    www.cnc-motorsports.com
    [email protected]

  3. #3
    Junior Member SHOW GUEST
    Join Date
    Jan 2010
    Location
    Southampton UK
    Posts
    8
    if you could let me know what you believe would be best and a total cost.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy