Page 1 of 5 123 ... LastLast
Results 1 to 10 of 41

Thread: Ron Owens racing

  1. #1
    Junior Member APPRENTICE
    Join Date
    Jan 2008
    Posts
    13

    Ron Owens racing

    Buyer BEWARE once you buy something from this man you own it right or wrong. Ordered a set of valve cover and they will not work to short (nothing on his site telling how tall they are) all i have been asking is to exchange them for taller ones and for 8 months all i get is a run around I HAVE HEARD EVERYTHING UNDER THE SUN on why i have'nt received them yet now. Now i have parts that are no use to me thanks Ron
    BUY BEWARE

  2. #2
    Senior Member EXPERT BUILDER gearhead1011's Avatar
    Join Date
    Jan 2004
    Location
    Shepherdsville, KY
    Posts
    313
    I find that hard to believe. Ron is a good guy although it seems he's been MIA lately. I'm sure there is a good explanation for this.

  3. #3
    Senior Member RACING JUNKIE BEAST477's Avatar
    Join Date
    Feb 2007
    Location
    Michigan
    Posts
    1,908
    Quote Originally Posted by gearhead1011
    I find that hard to believe. Ron is a good guy although it seems he's been MIA lately. I'm sure there is a good explanation for this.
    I agree, Ron is a good guy. Last year I ordered a Jesel belt, ordered the wrong one my fault. He sent me the correct one and let me sent the other back after I got the right one. No questions asked.

    Have you talked to Ron personally about this? I just find it hard to believe he won't work with you.
    BEAST477






    Only a rich man can afford to use cheap parts.

    http://www.racingjunk.com/profile/177549

  4. #4
    Senior Member RACING JUNKIE mopar1968's Avatar
    Join Date
    Dec 2006
    Location
    Abingdon,Virginia
    Posts
    3,579
    I totally disagree with you :!: I have been ordering part's from Ron for year's now :!: And i have never had a problem with him :!: He is a dang good guy to deal with :!: :!:


    Mark
    Head's up the true drag race!!

  5. #5
    Moderator RACING JUNKIE Harbone's Avatar
    Join Date
    Aug 2007
    Posts
    3,946
    Blog Entries
    1
    Never ever heard a single bad thing about Ron on here! Theres got to be more to the story... :roll:
    Chris

    As close to "Normal" as I can get...

  6. #6
    Junior Member APPRENTICE
    Join Date
    Jan 2008
    Posts
    13
    Like i said i just want to exchange them and i am still waiting and i am sure he will tell you the same thing i still dont have anything He seems like a good guy on the phone but i dont see how it can take this long just to exchange them.
    As i look at it im still out!

  7. #7
    Senior Member RACING JUNKIE BEAST477's Avatar
    Join Date
    Feb 2007
    Location
    Michigan
    Posts
    1,908
    He had a problem in the past with one of his suppliers. Is that what is going on here? If so it's kinda out of his control and he is at the mercy of the supplier.

    Ron, if you're out there you need to come on here and clear this up.
    BEAST477






    Only a rich man can afford to use cheap parts.

    http://www.racingjunk.com/profile/177549

  8. #8
    Senior Member RACING JUNKIE
    Join Date
    Dec 2007
    Location
    ohio
    Posts
    810
    He has a part no. for tall bbc valve covers, just looked at them a few weeks ago, also called and talked to him about them, was tolded it would take approx, ten day to get them, as they were fabed as orded, don't know what you are running, but there is a part no. for tall bbc valve covers on his site unless it has changed in the last few weeks.

  9. #9
    Senior Member RACING JUNKIE mytmouz's Avatar
    Join Date
    May 2006
    Location
    Pelahatchie, MS
    Posts
    983
    Quote Originally Posted by HR51gto
    Like i said i just want to exchange them and i am still waiting and i am sure he will tell you the same thing i still dont have anything He seems like a good guy on the phone but i dont see how it can take this long just to exchange them.
    As i look at it im still out!
    I have been there as well...

    Let the flaming begin!
    If you think nobody cares, try missing a payment...

  10. #10
    Senior Member DYNO OPERATOR
    Join Date
    Oct 2004
    Location
    florence ky
    Posts
    498

    Re: Ron Owens racing

    Quote Originally Posted by HR51gto
    Buyer BEWARE once you buy something from this man you own it right or wrong. Ordered a set of valve cover and they will not work to short (nothing on his site telling how tall they are) all i have been asking is to exchange them for taller ones and for 8 months all i get is a run around I HAVE HEARD EVERYTHING UNDER THE SUN on why i have'nt received them yet now. Now i have parts that are no use to me thanks Ron
    BUY BEWARE
    Mr Meyer i thought this was taken care since the last time i talked to you and Mr. Williams and had not heard back from you.
    I talked to Mr. Williams about this again and he told me that he has not sent you another set of covers out.
    We had a long talk about this he also told me he had sent another but they are lost although he he didn't give me any kind of proof of this.

    Mr. Williams said he had another set ready to be welded up and he would send them out to you this week Please let me know if you get them.

    I gave you his number and he said he had talked to you but looks like he dropped the ball .
    I will stay on him all week to make sure this taken care of.

    I am truly sorry about this and it will get handled.

  11. Racing Junk


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy