Results 1 to 3 of 3

Thread: cutting out bad under accelerating

  1. #1

    cutting out bad under accelerating

    hi what i have is a 302 worked over with msd dist8582 and a msd big square coil the plugs are white except a couple are black changed jets its a demon 600 front are83 and rear are 74 has a holley aftermarket pump mounted in rear changed wafers an screen been running it all race season and have changed so much what i have noticed is it does idle nice and revving the engine has no hesitation but when ou go up to staging lanes do your burnout burns out strong when lauching and starting to ace down the track starts stubbling and cutting out very bad and just keeps getting worse its not making no sense any pointers or ideas greatly appreciate thanks

  2. #2
    Senior Member RACING JUNKIE TheYellaBrick's Avatar
    Join Date
    Mar 2008
    Emmett, Idaho
    Fuel delivery problem, running the float bowls dry.

    to those who

    God Bless our folks in uniform
    "We the People, have your backs"

  3. #3
    Senior Member RACING JUNKIE curtisreed's Avatar
    Join Date
    Feb 2004
    You have 74 jets in the rear, are you running a power valve in the rear also? That is a pretty small jet. If you are running a power valve could you be uncovering it? Did it always do this? If not have you checked float level in the rear? Why would only a couple of plugs be black, bad wires or bad plugs? It might take a little more info on your part.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Copyright © 2005-2016 All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy