Results 1 to 3 of 3

Thread: Bondo Truckguard. Roll on Bed liner

  1. #1
    Junior Member SHOW GUEST
    Join Date
    Jul 2010
    Posts
    2

    Bondo Truckguard. Roll on Bed liner

    I just installed a roll on bed liner. I used the Bondo truckguard. I'm happy with the results but for a few things. 1st....The cheap ass roller that comes with the kit really only worked well 3/4 the way. 2nd...I would have liked to have a thicker layer. So here's my question: Is it possible to build up layers and if so....How would I prep it for the 2nd. layer? Also, am I screwed, if I decide to go with a spray in bed liner? Is it possible to go over my roll on liner? Thanks....

  2. #2
    Junior Member SHOW GUEST
    Join Date
    Jul 2010
    Posts
    2
    no one can help??

  3. #3
    Senior Member EXPERT BUILDER
    Join Date
    Mar 2003
    Posts
    337
    I would think all you have to do is put on another coat as long as it has had sufficient drying time between coats.
    It is textured so it would not need sanded or anything.
    I Also see no problem spraying on another bedliner if need be. 8)


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy