Results 1 to 1 of 1

Thread: motor plate hitting the head

  1. #1
    Junior Member SHOW GUEST
    Join Date
    Oct 2008

    motor plate hitting the head

    Here's my question, has anyone had a problem with the motor plate hitting the head and not allowing the plate to mate flush with block? (obviously driver's side only because of head stagger) The heads are old brodix ('80) and stick out 1/4" past the block. I bought 1/4" water pump spacers to offset the plate at the water pump, but that also includes spacing the plate out 1/4" from the chassis mount and the 2 lower block holes as well. Is this just a really thick older head issue or is this common with some aftermarket aluminum heads?

  2. Racing Junk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Copyright © 2005-2016 All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy