Results 1 to 3 of 3

Thread: cam grind help

  1. #1
    Senior Member EXPERT BUILDER
    Join Date
    Jul 2009
    nekoosa wisconsin

    cam grind help

    ok guys im looking for custom cam grind suggestions for a sbc it has
    9.3:1 compression and i want a high lift lift nasty sounding hydrallic flat tappet that will work with my set up

    std bore 350
    9.3:1 compression would like to run premium 91-93 octane
    1.94-1.5 worked iorn heads
    torker intake/ but i may upgrade to a knock off of the victor jr
    holley 750 (yes it's a little big)
    mallory unilite and mallory hyfire 6 ignition

    it will have a th 350 behind it with a 3000 stall converter
    4.11 gears

    im looking for a high lift nasty sounding cam that will work good with my set up and make lots of power through from abot 2,500/3,000-6,000

    im open to any help or suggestions

    thanks logan

  2. #2


    look at comp cam.........thumpr cams

  3. #3
    Senior Member DYNO OPERATOR
    Join Date
    Jan 2004
    central Illinois


    Just installed a Mutha Thumper Hydaulic roller in a 377 SBC street/Strip Nova.

    It does sound REALLY GOOD at idle. Also has enough vacuum for power booster on brakes.

  4. Racing Junk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Copyright © 2005-2016 All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy