Results 1 to 3 of 3

Thread: SBC Engine Lifting "Rings"

  1. #1

    SBC Engine Lifting "Rings"

    Chevrolet installed on some of their V8 engines "lifting rings" held onto the head by 2 bolts. Each had a 3/4 or 1" hole in the vertical part of the "ring" and I believe this was used by the factory during installation of the engine and simply left on the engine instead of taking time to remove. I need 2 of these things and would be grateful to anyone out there willing to be of help in this matter. Jim @ [email protected]

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Mar 2006
    Location
    EUGENE,OR.
    Posts
    3,408
    Hi Jim,

    Had them on last two engines... I remember running some wire-loom through them on one motor. I might still have one that I removed on my last motor in truck. I will check this weekend on my boxes... I might only have 1. How many you need?
    "I would walk through hell on Sunday before I fear the enemy"

  3. #3
    Senior Member RACING JUNKIE
    Join Date
    Dec 2004
    Location
    austin texas
    Posts
    729
    what area do you live in?


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy