Chevy G body ball joint question

Thread Tools
 
Old 06-22-2011, 01:49 PM
  #1  
markdunlap
Senior Member
DYNO OPERATOR
Thread Starter
 
Join Date: Jan 2004
Location: central Illinois
Posts: 459
Default Chevy G body ball joint question

I purchased a set of after market tubular A arms from a reputable builder. These are for a 1980 Malibu. After running them I decided I needed to change to a stronger set of front springs. Of course when I seperated the lower balll joint from the spindle, the rubber boots covering the ball joints were damaged by the fork I used. No problem, go get new boots or even new ball joints at the local parts stores, and just use the boots, right? Well no luck. All the boots on the ball joints are 1/4" larger where they locate on the ball joint. MOOG K6145T is the part number.

So I call the A arm maker and he says I probably can't find the smaller boot. He says they buy them in batches and sometimes they get one size, sometimes the other. Same ball joint number, just 2 different size boots.

The size of the shoulder on the ball joint is 1.600" or 1.825" where the boot mounts.

I gave in and paid him for 2 new ball joints that will have the smaller boot on them supposedly.

Anybody ever run into this and have a better solution? I found some generic boots in the parts stores and all them are the larger size.
markdunlap is offline  
Old 06-22-2011, 01:54 PM
  #2  
fast75vega
Senior Member
RACING JUNKIE
 
Join Date: Nov 2008
Location: Niagara Falls, NY
Posts: 965
Default

yes.... we get them all the time at our auto shop....... same company and when i take them out they dont even match let alone have the same dust boot....... i hate that :x
fast75vega is offline  
Old 12-16-2023, 04:49 AM
  #3  
rolexdev
Junior Member
SHOW GUEST
 
Join Date: Dec 2023
Posts: 2
Default

Sure, I'd be happy to help, but could you please provide more details or clarify your specific question about the Chevy G body ball joint? This will help me offer more accurate assistance.
rolexdev is offline  
Old 12-16-2023, 10:26 PM
  #4  
rolexdev
Junior Member
SHOW GUEST
 
Join Date: Dec 2023
Posts: 2
Default

Originally Posted by fast75vega View Post
yes.... we get them all the time at our auto shop....... same company and when i take them out they dont even match let alone have the same dust boot....... i hate that :x
It's terrible how inconsistent that is! Having to deal with mismatched parts, particularly the dust boot, from the same company might be a hassle. It is undoubtedly annoying that there isn't more consistency.Magic 8 Ball

rolexdev is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -