Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Engine HP and Trq Guess ?

  1. #1
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Location
    Coldwater, MI
    Posts
    2,998

    Engine HP and Trq Guess ?

    Lets have a little fun, nothing for the winner but some pride

    Going to dyno my new engine this week, lets take some guesses at what its going to make for HP and TRQ #'s

    Here are the specs

    598 CI BBC
    9.800 Short Deck Engine
    4.5 Stroke Callies Crank
    6.385 Manley Rods
    4.600 Wiseco Q16 Pistons 14.8:1 Compression

    Cam- Roller Cam Custom Ground 800/780 Lift

    Moroso Oil Pan, Steel with single trap door (nothing special)
    Moroso Billet Oil Pump

    Heads
    BMF 385s Fully CNC'd
    2.35 Stainless Steel Intake Valves
    1.880" Stainless Steel Exhaust Valves

    Sniper Intake Manifold Ported

    With a 2100cfm Rons Terminator on top

    Lets here some guesses, plan to run it up to 7500 on the dyno.
    David Lanning
    IHRA NHRA 387B

    Fleenor Racing Transmission
    419-280-1406
    Lanning Electric
    Complete Drag Car Wiring
    APD Race Engines
    www.apdracing.com

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Mar 2003
    Location
    Fountain,MICHIGAN
    Posts
    856

    Guess/////////////>?

    1065
    Later
    'G 8)

  3. #3
    Senior Member RACING JUNKIE
    Join Date
    Dec 2007
    Location
    ohio
    Posts
    810
    1100hp.

  4. #4
    Senior Member EXPERT BUILDER
    Join Date
    Jul 2009
    Location
    nekoosa wisconsin
    Posts
    308
    plus side of 1050 how much idk but thats making some serious power

  5. #5
    Senior Member RACING JUNKIE
    Join Date
    Nov 2008
    Location
    Niagara Falls, NY
    Posts
    965
    i will go with around 1040ish with about 890 ft pounds of torque
    GOOD PARTS AREN'T CHEAP AND CHEAP PARTS ARE NEVER GOOD.........
    http://img.photobucket.com/albums/v2...lastscan-3.jpg

  6. #6
    Senior Member RACING JUNKIE
    Join Date
    Nov 2008
    Location
    Niagara Falls, NY
    Posts
    965
    any numbers yet?
    GOOD PARTS AREN'T CHEAP AND CHEAP PARTS ARE NEVER GOOD.........
    http://img.photobucket.com/albums/v2...lastscan-3.jpg

  7. #7
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Location
    Coldwater, MI
    Posts
    2,998
    Quote Originally Posted by fast75vega
    any numbers yet?
    Not yet it'll be tomorrow or friday,

    My guess 1068hp and 852. I said 1050 when I went into it so anything above that is a bonus.
    David Lanning
    IHRA NHRA 387B

    Fleenor Racing Transmission
    419-280-1406
    Lanning Electric
    Complete Drag Car Wiring
    APD Race Engines
    www.apdracing.com

  8. #8
    Senior Member RACING JUNKIE
    Join Date
    Nov 2008
    Location
    Niagara Falls, NY
    Posts
    965
    Quote Originally Posted by hammertime
    Quote Originally Posted by fast75vega
    any numbers yet?
    Not yet it'll be tomorrow or friday,

    My guess 1068hp and 852. I said 1050 when I went into it so anything above that is a bonus.
    cool... really wondering what that monster will pull
    GOOD PARTS AREN'T CHEAP AND CHEAP PARTS ARE NEVER GOOD.........
    http://img.photobucket.com/albums/v2...lastscan-3.jpg

  9. #9
    Senior Member RACING JUNKIE fla1976's Avatar
    Join Date
    Aug 2007
    Posts
    1,530
    1071 HP & 874.

  10. #10
    Senior Member RACING JUNKIE
    Join Date
    Nov 2008
    Location
    Niagara Falls, NY
    Posts
    965
    hey hammer..... u doing a motor dyno or chassis?
    GOOD PARTS AREN'T CHEAP AND CHEAP PARTS ARE NEVER GOOD.........
    http://img.photobucket.com/albums/v2...lastscan-3.jpg


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy