nutup

I have a question about cams most gear heads understand lift and duration but what about for example a 900 base circle 108 lobe center what does it all mean to me choosing a cam to fit my application? I have never really understood this I always count on the cam manufacturer I don't know how generic the info they give is don't get me wrong I under stand some just all info together how does it effect each other

fla1976

Here is a site that may help with the terminology.

http://www.lunatipower.com/Tech/Cams...fileTerms.aspx

nutup

let me ask how does lobe center effect like a 108 lobe center or a 104 lobe center what builds more power with higher compression engines? I know there is a lot more involved but any info is good to have

fla1976

Here is another site with more indepth explanation. It is a V-twin site but the information is applicable.

http://www.v-twinforum.com/forums/tw...bers-mean.html

bixblk

Those links contain well written info, thanks

nutup

thanks that helps a lot that's what i was looking for and it proves one my newest suggested cams is not even close to what results I was after