Results 1 to 7 of 7

Thread: carb spacer

  1. #1

    carb spacer

    I am looking for a carb spacer to run on my 360cid crate motor. Just install an Edelbrock air gap 7576 with a 750 Holley. May have to go to a for hood clearance, is 4 hole, 2 hole or wide open the best.
    Mike

  2. #2
    Senior Member RACING JUNKIE mopar1968's Avatar
    Join Date
    Dec 2006
    Location
    Abingdon,Virginia
    Posts
    3,579
    I run a 4 hole spacer on my small block into a indy intake :!: :!:



    Mark
    Head's up the true drag race!!

  3. #3
    Senior Member RACING JUNKIE
    Join Date
    Nov 2008
    Location
    Niagara Falls, NY
    Posts
    965
    Quote Originally Posted by mopar1968
    I run a 4 hole spacer on my small block into a indy intake :!: :!:



    Mark
    now... why a four hole... s their really a difference? im running a open spacer with a 4 hole on top of that.
    GOOD PARTS AREN'T CHEAP AND CHEAP PARTS ARE NEVER GOOD.........
    http://img.photobucket.com/albums/v2...lastscan-3.jpg

  4. #4
    Senior Member MASTER BUILDER
    Join Date
    Apr 2003
    Location
    Brookings South Dakota
    Posts
    244
    Every engine is different. Some like open spacers, some ported spacers.

    Typically we see the 4 hole ported spacers work the best for most applications.

    Hamburger makes a nice 1 inch ported spacer.
    Competition Engines & Hardcore Engine Parts
    www.cnc-motorsports.com
    [email protected]

  5. #5
    Senior Member RACING JUNKIE mopar1968's Avatar
    Join Date
    Dec 2006
    Location
    Abingdon,Virginia
    Posts
    3,579
    Mine is a ported 4 hole spacer. The bottom side of the holes are larger than the top of the holes.Engine was dynoed with spacer :!:


    Mark
    Head's up the true drag race!!

  6. #6

    carb spacer

    Quote Originally Posted by mopar1968
    Mine is a ported 4 hole spacer. The bottom side of the holes are larger than the top of the holes.Engine was dynoed with spacer :!:


    Mark
    Mark, Did you enlarge the spacer yourself or did it come that way, and who makes it? Thanks,
    Mike

  7. #7
    Senior Member RACING JUNKIE mopar1968's Avatar
    Join Date
    Dec 2006
    Location
    Abingdon,Virginia
    Posts
    3,579
    Here it is if you will look the hole's are tapered, It work's like a champ on my car :!: :!: The guy's that dynoed my engine worked to get me the best from the engine and found this plate work's great :!: :!:

    http://www.jegs.com/i/Barry-Grant/13...oductId=743575



    Mark
    Head's up the true drag race!!


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy