Chevy ZZ4 intake bolts

Old 03-18-2011, 05:36 AM
  #1  
Harbone
Moderator
RACING JUNKIE
Thread Starter
 
Harbone's Avatar
 
Join Date: Aug 2007
Posts: 4,041
Default Chevy ZZ4 intake bolts

I have a ZZ4 motor that seems to seep a little oil up through the intake bolts. Never had this problem with any other small block I have ran but have never had a ZZ4 motor. Would taking the bolts back out and putting teflon on help?
__________________
Chris

As close to "Normal" as I can get...
Harbone is offline  
Old 03-18-2011, 08:36 AM
  #2  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

Would probably work but ARP bolt sealer would work better, it's teflon paste, a cheaper version is available at your local hardware it's also teflon a plumbing sealer about $4.00 for a small tube.

JMO

Zip.
zipper06 is offline  
Old 03-18-2011, 09:22 AM
  #3  
Harbone
Moderator
RACING JUNKIE
Thread Starter
 
Harbone's Avatar
 
Join Date: Aug 2007
Posts: 4,041
Default

Thanks Zip!! I actually have some teflon paste left over from redoing my upstairs bathroom vanity 2 weeks ago.
__________________
Chris

As close to "Normal" as I can get...
Harbone is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -