Results 1 to 3 of 3

Thread: Chevy ZZ4 intake bolts

  1. #1
    Moderator RACING JUNKIE Harbone's Avatar
    Join Date
    Aug 2007
    Posts
    3,945
    Blog Entries
    1

    Chevy ZZ4 intake bolts

    I have a ZZ4 motor that seems to seep a little oil up through the intake bolts. Never had this problem with any other small block I have ran but have never had a ZZ4 motor. Would taking the bolts back out and putting teflon on help?
    Chris

    As close to "Normal" as I can get...

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    Location
    La.
    Posts
    2,890
    Would probably work but ARP bolt sealer would work better, it's teflon paste, a cheaper version is available at your local hardware it's also teflon a plumbing sealer about $4.00 for a small tube.

    JMO

    Zip.

  3. #3
    Moderator RACING JUNKIE Harbone's Avatar
    Join Date
    Aug 2007
    Posts
    3,945
    Blog Entries
    1
    Thanks Zip!! I actually have some teflon paste left over from redoing my upstairs bathroom vanity 2 weeks ago.
    Chris

    As close to "Normal" as I can get...


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy