chevy 350 estimated hores power
#1
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
chevy 350 estimated hores power
oh i am building a 350 with 9.5:1 compression 1.94 1.5 heads edelbrok torquer intake holley 750 and a summit racing cam 292/292 488/88 im hoping to end up with around 350 at the fw what do you guys think??
what about 2.02 1.6 head are they good for strret use or should i stick with the 1.94 any other things i can do to squeez a few more h.p out of it??
thanks logan
what about 2.02 1.6 head are they good for strret use or should i stick with the 1.94 any other things i can do to squeez a few more h.p out of it??
thanks logan
#3
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
i know but i was talking to a guy that builds the engines for cars at our local short track and he thinks i would be ok with 1.94 for street use he thinks 2.02 are for more strip car rather than street
#7
Originally Posted by dragonmaster093
my issue with 1.94 heads is they dont breath well and 2.02 heads were stock on lost of 350 motors destined for street from factory but maybe just me
#8
Senior Member
RACING JUNKIE
Join Date: Mar 2009
Location: kingsport tn
Posts: 1,729
462624.....75-86...350/400......76cc chamber, 1.72/1.5, 1.94/1.5 or 2.02/1.6 valves
330545.....73......350..........76cc chamber, 2.02/1.60
333881.....74-75...350..........76cc chamber, 2.02/1.60
330545.....73......350..........76cc chamber, 2.02/1.60
333881.....74-75...350..........76cc chamber, 2.02/1.60
#9
Originally Posted by dragonmaster093
462624.....75-86...350/400......76cc chamber, 1.72/1.5, 1.94/1.5 or 2.02/1.6 valves
330545.....73......350..........76cc chamber, 2.02/1.60
333881.....74-75...350..........76cc chamber, 2.02/1.60
330545.....73......350..........76cc chamber, 2.02/1.60
333881.....74-75...350..........76cc chamber, 2.02/1.60
#10
Senior Member
RACING JUNKIE
Join Date: Nov 2008
Location: Niagara Falls, NY
Posts: 965
two good sites for looking up head numbers
http://www.fastnuf.com/Headguide.html
http://www.thedirtforum.com/castings.htm
http://www.fastnuf.com/Headguide.html
http://www.thedirtforum.com/castings.htm