Results 1 to 6 of 6

Thread: Can anyone help with a sbc build up

  1. #1
    Junior Member APPRENTICE
    Join Date
    Mar 2005
    Location
    Hobbsville, NC
    Posts
    20

    Can anyone help with a sbc build up

    I have a 350 block, steel crank and a set of eagle rods, 5.7. I have had some bad BBC before but not really messed with SBC too much. Want to be able to put a non-lightened up S10 in the low 10s. 488 gears 550 converter. I still need to buy the rest of the stuff, heads, cam( would like to stay with a solid... mechanical) ,pistons, etc... Can you guys help me out from here...Thanks alot, Rob...
    YOU GOT TO BE IN IT, TO WIN IT

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Apr 2009
    Location
    kingsport tn
    Posts
    1,735
    stroke it punch it .030 min order scat or eagle rotating assembly if street driven too not much over a 9:1 cr dart makes a top end kit with pro 1 heads and intake or eldelbrock has one that also includes matched cam summit part #edl-2096 460hp kit
    CRIMEDOG
    Sam Wood

  3. #3
    Senior Member RACING JUNKIE jmarksdragster's Avatar
    Join Date
    Jul 2007
    Location
    Florida
    Posts
    635
    Plan on a roller cam and REAL good heads and intake, and you will need to spin it a bit. I would call Chad for heads if you need to stay with 23˚ heads. Something like these.

    http://1320techtalk.com/viewtopic.php?t=2053
    Mark Whitener
    http://racingfuelsystems.myfunforum.org
    __________

    Good work isn't cheap, and cheap work can't be good.

  4. #4
    Senior Member RACING JUNKIE TheYellaBrick's Avatar
    Join Date
    Mar 2008
    Location
    Emmett, Idaho
    Posts
    7,334
    I know of a Chevelle with an 'extreme' RPM small block in it !
    A tad spendy though :shock: :shock:
    TRUTH is HATE
    to those who
    HATE TRUTH

    God Bless our folks in uniform
    "We the People, have your backs"
    http://www.racingjunk.com/profile/279898

  5. #5
    Junior Member APPRENTICE
    Join Date
    Apr 2006
    Location
    New Haven, CT
    Posts
    16

    Re: Can anyone help with a sbc build up

    Quote Originally Posted by robertstell
    I have a 350 block, steel crank and a set of eagle rods, 5.7. I have had some bad BBC before but not really messed with SBC too much. Want to be able to put a non-lightened up S10 in the low 10s. 488 gears 550 converter. I still need to buy the rest of the stuff, heads, cam( would like to stay with a solid... mechanical) ,pistons, etc... Can you guys help me out from here...Thanks alot, Rob...
    I would say that is not a problem at all. I don't know about the gear choice until your tire diameter is worked out. to run low 10's, which I assume is 10.25 @ 130, with a 28" tall tire and that gear you would be going threw around 8000rpm. bad move. now if you have a 30" tall tire, you would be around 7500rpm w/con slippage factored in. a 4.56 gear at the same time would put you around 7000rpm. 410 gear would put you where you need to be with that tire and your engines ability to make decent power up to 6800 rpm the 350 is very capable of delivering the results you need with no problems. a 390b6 comp cams solid roller with decent compression and double hp heads will make a 3000lb car run 10.50's so don't sweat it. built it like you want and watch the gear and converter choices.

  6. #6
    Senior Member RACING JUNKIE oldandtired's Avatar
    Join Date
    Dec 2008
    Location
    Sugar Hill, GA
    Posts
    1,368
    290B6
    Dave
    http://www.racingjunk.com/profile/343797
    "All that is necessary for the triumph of evil is for good men to do nothing" Edmund Burke


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy