injection ( position of nozzels in runner )( with nitrous )

Old 01-01-2011, 11:27 AM
  #1  
lindseys67
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Dec 2004
Posts: 11
Default injection ( position of nozzels in runner )( with nitrous )

i have a enderlie injection with a bird catcher on a edelbrock intake on al
1- the nozzels & lines are at the bottom of runner ,but i am going to install a fogger and i am curious to know where is the best place to have the injection nozzels at the bottom of runners or towards the top ans keep nos nozzela at bottom ,, any info will be trult appreciated ,, thanks larry
lindseys67 is offline  
Old 01-01-2011, 02:12 PM
  #2  
lindseys67
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Dec 2004
Posts: 11
Default info needed ?????????

i didnt check the spelling .. but i didnt type that very good ,, so ill try it again .. i have a enderlie injected motor that i am going to put nos on
and id like to know if it is better to have the alcohol nozzels at the bottom
and the nos nozzels above or move the alcohol nozzels up the runners and put nos nozzels at bottom of runner ,,
lindseys67 is offline  
Old 01-01-2011, 03:19 PM
  #3  
fla1976
Senior Member
RACING JUNKIE
 
fla1976's Avatar
 
Join Date: Aug 2007
Posts: 1,523
Default

It seems to me that you might have a problem due to the cooling effect of alcohol combined with the cooling effect of nitrous. On gas, I'd say put the nitrous above the gas. I am sure someone with some injection experience will give some better advice. Maybe Zipper will chime in. He's experienced with injection systems.
fla1976 is offline  
Old 01-01-2011, 03:41 PM
  #4  
TS1955
Senior Member
DYNO OPERATOR
 
Join Date: Aug 2007
Location: Lost Creek, WV
Posts: 533
Default

We have a Top Dragster running a Rons Terminator on alcohol along with a NOS Fogger systen. The fuel port nozzles are 1 inch up the runner from the flange. And from there 1 inch to the NOS nozzles.

TS1955
TS1955 is offline  
Old 01-03-2011, 04:39 AM
  #5  
lindseys67
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Dec 2004
Posts: 11
Default

thanks for the info !!!!!
lindseys67 is offline  
Old 01-03-2011, 09:54 AM
  #6  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

Originally Posted by TS1955
We have a Top Dragster running a Rons Terminator on alcohol along with a NOS Fogger systen. The fuel port nozzles are 1 inch up the runner from the flange. And from there 1 inch to the NOS nozzles.

TS1955
X2

Zip.
zipper06 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -