Is it legal to sell VIN tags and title..
#1
Is it legal to sell VIN tags and title..
Heres an ad I stumbled across, isnt this illegal??
http://www.racingjunk.com/category/1...-serial-s.html
http://www.racingjunk.com/category/1...-serial-s.html
__________________
Chris
As close to "Normal" as I can get...
Chris
As close to "Normal" as I can get...
#3
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Location: orland pk il
Posts: 2,399
from what I understand selling the firewall and using a part of it in the new car is legal( camaro rebody) but you must use a portion of the firewall, read this about a camaro being redone & also on a tri-chevy being rebodyed & is legal. tags only is NOT.
#5
Senior Member
DYNO OPERATOR
Join Date: Jul 2003
Location: Chelsea Oklahoma
Posts: 556
hummm, i have to slightly disagree, u can in Oklahoma, do a build, and place a new/used vin from a donor car, as long as you have proof of the build and a clean bill of sale for the donor Vin, we did it on a 40 ford coupe, and after the build, we had to take it to the okla highway patrole Insp, station in tulsa, for a Insp, and show all the Pics of the build and Receipt's, and it shows on the title, that it is not the original Vin plate, and after the fact, he said, oklahoma would have just giving us a new plate,,after the build and the state insp. but i bet there is a few people that do the old, out with the hot car Vin plate, and in with the donor vin plate,
#8
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Posts: 4,137
Originally Posted by bigray
hummm, i have to slightly disagree, u can in Oklahoma, do a build, and place a new/used vin from a donor car, as long as you have proof of the build and a clean bill of sale for the donor Vin, we did it on a 40 ford coupe, and after the build, we had to take it to the okla highway patrole Insp, station in tulsa, for a Insp, and show all the Pics of the build and Receipt's, and it shows on the title, that it is not the original Vin plate, and after the fact, he said, oklahoma would have just giving us a new plate,,after the build and the state insp. but i bet there is a few people that do the old, out with the hot car Vin plate, and in with the donor vin plate,
#9
I had to get a title for a Drag car about 4 years ago. DMV sends out a trooper to find VIN number on the car so they can run it and make sure it isn't stolen or anything, Now he told me that the Vin number on the frame was a myth.Because car's get totaled and the frames either get replaced or repaired he said the vin is in three places and it is only the last 6 of the vin not the whole vin. {1} Left top of raditor support {2} remove blower motor look at edge where motor mounts {3} remove left rear speaker and look on flange where speaker mounts. I checked all three places and it was there. He used the one on raditor support.Now this was on a Mopar others could be different. JMO Mark
#10
Originally Posted by mopar1968
I had to get a title for a Drag car about 4 years ago. DMV sends out a trooper to find VIN number on the car so they can run it and make sure it isn't stolen or anything, Now he told me that the Vin number on the frame was a myth.Because car's get totaled and the frames either get replaced or repaired he said the vin is in three places and it is only the last 6 of the vin not the whole vin. {1} Left top of raditor support {2} remove blower motor look at edge where motor mounts {3} remove left rear speaker and look on flange where speaker mounts. I checked all three places and it was there. He used the one on raditor support.Now this was on a Mopar others could be different. JMO Mark