Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Rons

  1. #1
    Senior Member RACING JUNKIE mopar1968's Avatar
    Join Date
    Dec 2006
    Location
    Abingdon,Virginia
    Posts
    3,579

    Rons

    Will a Ron's flying Toliet work with race gas instead of alcohol ?
    Head's up the true drag race!!

  2. #2
    just a matter of tuning (pump, pill, and nozzle sizes). i'd call ron's direct and they should have a baseline for your application.

  3. #3
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Location
    Coldwater, MI
    Posts
    2,998
    Yes but the tuning window is narrow, and my question would be why not run it on alky
    David Lanning
    IHRA NHRA 387B

    Fleenor Racing Transmission
    419-280-1406
    Lanning Electric
    Complete Drag Car Wiring
    APD Race Engines
    www.apdracing.com

  4. #4
    Senior Member RACING JUNKIE mopar1968's Avatar
    Join Date
    Dec 2006
    Location
    Abingdon,Virginia
    Posts
    3,579
    What all would i have to change :?: :?: Pump at tank :?:
    Head's up the true drag race!!

  5. #5
    Senior Member RACING JUNKIE curtisreed's Avatar
    Join Date
    Feb 2004
    Location
    KIEFER, OK.
    Posts
    1,309
    David,
    Wouldn't it need a different spool in the barrel valve so it is less aggressive on fuel delivery?

    Curtis

  6. #6
    Senior Member RACING JUNKIE mopar1968's Avatar
    Join Date
    Dec 2006
    Location
    Abingdon,Virginia
    Posts
    3,579
    This is what i got from Ron's;


    I don't recommend using a mechanical fuel injection system with gasoline for many reasons. In an injected application gasoline is best suited in the EFI arena. Sorry.

    James Monroe
    812-327-1190
    www.KillerRONS.COM

    ----- Original Message -----
    From: To: [email protected]
    Sent: Friday, December 03, 2010 12:30 AM
    Subject: pill's etc


    I need to check on parts to switch a flying toliet over to gas. What all will i need for the injection unit?
    Head's up the true drag race!!

  7. #7
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    Location
    La.
    Posts
    2,890
    Quote Originally Posted by mopar1968
    This is what i got from Ron's;


    I don't recommend using a mechanical fuel injection system with gasoline for many reasons. In an injected application gasoline is best suited in the EFI arena. Sorry.

    James Monroe
    812-327-1190
    www.KillerRONS.COM

    ----- Original Message -----
    From: To: [email protected]
    Sent: Friday, December 03, 2010 12:30 AM
    Subject: pill's etc


    I need to check on parts to switch a flying toliet over to gas. What all will i need for the injection unit?
    Wrong,Wrong,Wrong

    Mopar you have a PM, the toilet will work just fine on gas, you have to have a forced induction pump such as a "0" front mounted pump, it's so easy to run you'll never go back to a carberator, and yes i run one and so does 2 other friends run them and no i don't work for Rons.
    Injection is the simpliest system in the world to run be it a toilet,stacks or a hat, they are drop dead easy to run once you learn the basics. I've been running them for over 40 yrs, blown gas, blown alcohol, stacks, hats and toilet bowls.

    Zip.

  8. #8
    go to rons direct....www.ronsfuel.com

    monroe is only a "dealer". (kinda like biondo for digital delay.) i had my chance to deal with him (monroe) but choose not to for various reasons that are neither here or there.

    I have had 3 rons systems (2 toilets and a T2) and will only deal with rons fuel directly for these systems.

    enderle has "gas" barrel valves and systems so obviously it can be done.

  9. #9
    Senior Member RACING JUNKIE mopar1968's Avatar
    Join Date
    Dec 2006
    Location
    Abingdon,Virginia
    Posts
    3,579
    I did contact Ron's directly and they said ''Zip'' was dead on, Yes it will work either way Gas or Alcohol :!: :!: ''Zip'' i might bug you from time to time on getting this right :!: :!: Again thank you ''Zip'' for the info, And thank the rest of you for input :!:
    Head's up the true drag race!!

  10. #10
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    Location
    La.
    Posts
    2,890
    Quote Originally Posted by mopar1968
    I did contact Ron's directly and they said ''Zip'' was dead on, Yes it will work either way Gas or Alcohol :!: :!: ''Zip'' i might bug you from time to time on getting this right :!: :!: Again thank you ''Zip'' for the info, And thank the rest of you for input :!:
    Not a problem Mark, myself and the other 2 people i know with toilets run alcohol. but gas is not an issue/problem.
    NOW i'm going to make you (maybe have less respect for me) I just built a 481" BB/C with a hilborn stacks injection that i setup for gas, here's the kicker, it's going into a 88 1900 lb tube chassis Dodge Daytona :P . I fully expect it will run close to 5.50 or better.

    Zip.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy