In car Video of me racing my buddy
#1
Member
MASTER JOURNEYMAN
Thread Starter
Join Date: Jun 2010
Posts: 38
In car Video of me racing my buddy
This is a in car video of me racing my long time friend who actually got me into racing. He has been racing for 20 years or so.. He schooled me off the line.. I ran a 6.06 to his 6.11 He killed me off the tree.
The video was taken by a sony handy cam that was taped with electrical tape to the side of my funny car cage.
It worked great.. Cannot believe that it was that steady.. I just wrapped a rag around it and it worked.
Hope you enjoy !
http://www.youtube.com/watch?v=CQKa0yMaD74
The video was taken by a sony handy cam that was taped with electrical tape to the side of my funny car cage.
It worked great.. Cannot believe that it was that steady.. I just wrapped a rag around it and it worked.
Hope you enjoy !
http://www.youtube.com/watch?v=CQKa0yMaD74
#8
Member
MASTER JOURNEYMAN
Thread Starter
Join Date: Jun 2010
Posts: 38
I'm from Wichita Falls Tx.. Race at the local track here Wichita Drag Strip.. Ben racing since July.. Got a Ton to learn..
1971 Camaro, Full 4-link chassis, F/C cage. All steel except rear wing and hood. NHRA 7.50 certification .
Pump Gas 502, iron Merlin heads, full roller,stud girdles, Dominator, coated Hookers. All forged, actually built as an endurance motor. .
Glide, 180 straight cuts, pro-tree brake..
2 Optima's, Simpson chute, 15 x 33's, Dana 60, all aerospace brakes, strange coilovers.
Thats really all I know right now..
Fastest time with me is a 6.0039 at 113 mph 60ft time is a 1.32
1971 Camaro, Full 4-link chassis, F/C cage. All steel except rear wing and hood. NHRA 7.50 certification .
Pump Gas 502, iron Merlin heads, full roller,stud girdles, Dominator, coated Hookers. All forged, actually built as an endurance motor. .
Glide, 180 straight cuts, pro-tree brake..
2 Optima's, Simpson chute, 15 x 33's, Dana 60, all aerospace brakes, strange coilovers.
Thats really all I know right now..
Fastest time with me is a 6.0039 at 113 mph 60ft time is a 1.32