chevette help

Old 07-18-2010, 04:15 AM
  #1  
ballsout1
Junior Member
JOURNEYMAN
Thread Starter
 
Join Date: May 2010
Posts: 28
Default chevette help

just bought a small block chevette and i`m searching for headers that will fit. i`m hoping something from another vehcle might work. also looking for a lite weight scooped hood....
ballsout1 is offline  
Old 07-18-2010, 04:12 PM
  #2  
ballsout1
Junior Member
JOURNEYMAN
Thread Starter
 
Join Date: May 2010
Posts: 28
Default

i`m thinking more room for headers if i relocate the master cylinder to the inside of the car on the left and a small starter on the right and a narrowing and reboxing of the front subframe. on the right....i need some input here. i`m gona contact some header manufactuers direct. theres nil for room in there.
ballsout1 is offline  
Old 07-18-2010, 04:13 PM
  #3  
bjuice
Administrator
RACING JUNKIE
 
bjuice's Avatar
 
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,236
Default

Originally Posted by ballsout1
i`m thinking more room for headers if i relocate the master cylinder to the inside of the car on the left and a small starter on the right and a narrowing and reboxing of the front subframe. on the right....i need some input here. i`m gona contact some header manufactuers direct. theres nil for room in there.
fender well exits.
__________________
Bjuice..

"I'M YOUR HUCKLEBERRY ! "
bjuice is offline  
Old 07-20-2010, 04:58 PM
  #4  
ballsout1
Junior Member
JOURNEYMAN
Thread Starter
 
Join Date: May 2010
Posts: 28
Default

well... i want to run the stock inner fenders, its also the upper shock mount and its structural to the front subframe assembly. if it was a full cage as opposed to my bar set up i could do the shock mounts to the front engine compartment bars... but thats not what i have. idealy i like to have a bigger tube street rod "hugger" header that was actually made for my applcation. anyways thnx for the input.
ballsout1 is offline  
Old 07-20-2010, 06:00 PM
  #5  
bjuice
Administrator
RACING JUNKIE
 
bjuice's Avatar
 
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,236
Default

don't know about running stock fender wells....but here is my Friends 1977 Honda Civic 555ci alcohol blown injected BBC.....The Vid you are seeing is a 4.69et pass 150mph +.....you should see it when he runs 40%-50% nitro.. :roll:

the civic might even have a little shorter wheel base then your chevette..

Danny has real Big balls driving this car....see the other Vids attached and watch the man drive this car....






http://www.youtube.com/watch?v=mYzKN...eature=related
__________________
Bjuice..

"I'M YOUR HUCKLEBERRY ! "
bjuice is offline  
Old 07-20-2010, 06:59 PM
  #6  
cam67152
Senior Member
MASTER BUILDER
 
Join Date: Apr 2009
Location: B.C. Canada
Posts: 145
Default

Those aren't BIG BALLS those are CO-CO NUTS :shock:
cam67152 is offline  
Old 07-20-2010, 07:15 PM
  #7  
THERATTLER
Senior Member
RACING JUNKIE
 
THERATTLER's Avatar
 
Join Date: Sep 2003
Location: LICKSKILLET , MISSISSIPPI
Posts: 1,466
Default

here is my favorite of Danny
http://www.youtube.com/watch?v=YPKc4dvWmdY&NR=1
THERATTLER is offline  
Old 07-20-2010, 08:46 PM
  #8  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

Just a guess but the early nova 63/67 may fit the front subframe, there are a few mfg'er of them for under the car, but i think only 1 3/4" max.

Zip.
zipper06 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -