400 turbo wont go into gear HELP PLEASE
07-16-2010, 01:33 AM
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Nov 2008
Posts: 8
400 turbo wont go into gear HELP PLEASE
ok a friend of mine had his 400 turbo rebuilt and then he bent the rod the linkage goes on so dumb me gets to fix it. well i took it apart and when i put it back together i forgot the put the stud that goes int the shift valve back in so it done nothing. needless to say i took it back apart and fixed it and it still wont do anything. any ideas. please
07-16-2010, 07:02 AM
#2
Senior Member
RACING JUNKIE
Join Date: Dec 2004
Location: austin texas
Posts: 729
Did it ever work after the rebuild? Check the front pump for damage, Maybe the convertor was not engaged when it was installed and broke the front pump. I am assuming you fixed the gear selector arm and valve in the pan.
