Neutral safety swtich
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: May 2008
Location: Marion,PA
Posts: 5
Neutral safety swtich
I read the previous ?'s about this and tried to wire a switch without success. I have a master disconect on the bumper, a kill switch (to msd ign) inside. I have a b&m megashifter with both reverse & neutral safety micros on it. I gave up on the reverse lights, I will just hard wire them to a togle. But the safety Im told I will need to run it at the track. I've tried to hook it to each of the two wires on the inboard side of the starter, and the 1 on the outboard side, seperately ofcaurse. I also tried to wire to the msd ign without sucsess. I know Im over looking the obvious. Any help would be greatly appreciated. Oh its a 87 ssmonte. Thanx