how to wire msd crank trigger
#1
Junior Member
JOURNEYMAN
Thread Starter
Join Date: Jan 2008
Posts: 28
how to wire msd crank trigger
i have a used crank trigger for a sbc.and iam running a mallory unlite dist. and a 6al box. how do you install and set up crank trigger,wiring,phasing the rotor,ect?and do you have to lock out the timing
#2
#4
One thing to remember is that on a distributor the wires from your ign. box that plugs into the dis. are swapped. ( Green to Violet). On a crank trigger they match ( Green to Green, Violet to Voilet). The crank trigger should have a plug so it shouldn't be a problem.
#5
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Originally Posted by TheRabbit
One thing to remember is that on a distributor the wires from your ign. box that plugs into the dis. are swapped. ( Green to Violet). On a crank trigger they match ( Green to Green, Violet to Voilet). The crank trigger should have a plug so it shouldn't be a problem.