383 stroker RPMS?
#1
Junior Member
APPRENTICE
Thread Starter
Join Date: Mar 2010
Posts: 22
383 stroker RPMS?
I am building a 383 stroker motor. And was wondering what rpms I will be able to run. It has 202 camel hump heads, eagle performance crankshaft, H beam eagle rods, Molly pistons. I set the end gap to .018 top ring and bottum ring .021, Comp hydraulic roller cam with roller rockers .542 intake .560 exhaust. And a 750 SS quick fuel carburator? And does anyone know what my HP rating should be?
#6
Senior Member
EXPERT BUILDER
Join Date: Sep 2003
Posts: 259
I would not use the old 461 style heads,double hump,if you can budget for some better heads.I used the old iron eagle 215 heads with a team g manifold on my 355 in my 68 camaro with great success.I now use a set of the iron eagle platinums on my 383 and they are worth about a tenth over my old iron eagles.
I am willing to sell the iron eagles and manifold if you are interested.
http://stevecoxracing.com
I am willing to sell the iron eagles and manifold if you are interested.
http://stevecoxracing.com
#10
Junior Member
APPRENTICE
Thread Starter
Join Date: Mar 2010
Posts: 22
Pistion size
4.030 bore. Ring gap: top ring .018 bottum ring .021, Ive already spent some bucks getting these double hump 202 machined, ported new valves and seats, and screw in studs. So I am going to run them for a while.