Results 1 to 3 of 3

Thread: roll cage question

  1. #1

    roll cage question

    I am putting in a jester 10 point cage in my wifes nova. the seatbelt bar and the two (short) down riggers that attach the front suspension mount to to the seatbelt bar and main hoop, are 1 1/4 inch. the main hoop and all the other bars are 1 5/8. I called jegs and they said the bars are legal for competition. Just want to make sure before I weld them in place. because the cage in my car has all the same diameter bars.

  2. #2
    Senior Member MASTER BUILDER
    Join Date
    Apr 2009
    B.C. Canada
    Yes 1 1/4" is all that is required for those bars, min. thickness must be .065" CM or .118 MS.

    Good luck with the install


  3. #3
    thanks for the quick response, I will weld it in

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Copyright © 2005-2016 All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy