TIRE SIZE/RPM

Old 04-08-2010, 04:59 AM
  #1  
JEFF69Z28
Senior Member
DYNO OPERATOR
Thread Starter
 
Join Date: Apr 2008
Posts: 496
Default TIRE SIZE/RPM

HOW MUCH RPM IF ANY WILL BE LOST WITH A 28X9X15 M/T SLICK AS IT GROWS GOING DOWN THE TRACK
JEFF69Z28 is offline  
Old 04-13-2010, 10:39 AM
  #2  
andybyrd
Senior Member
MASTER BUILDER
 
Join Date: Mar 2009
Posts: 151
Default

depending on your top end speed from 1/8 on up to the 1/4 , I had a 69 chevell w/29x10s and from the 1/8 on up they grew a 1'' and rubbed on my wheel well. and that was pulling through the 1/8 at 6.40 and 10 flat in the 1/4 @8000 rpm because I had it geared wrong with a 538. so it may cost you 2 or 3 hundred rpms
Be Safe Andy
andybyrd is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -