Results 1 to 2 of 2

Thread: stalling--problem-----PLEASE HELP

  1. #1
    Junior Member SHOW GUEST
    Join Date
    Apr 2007

    stalling--problem-----PLEASE HELP

    i have a 383 stroker with world product heads 10.4to1 compression,,victor intake ,,lots of port work on intake and heads,,,timing at 38 degrees,,,car ran an 11.50 with a bad tranny,,,,,,,,,,,my problem is ,,the car shuts right off when it revs out,,,,the car ran perfect and then all of the sudden it started doing this,,,i do not know if it is a carb or electrical problem,,it has a msd 6al with pro billet dis,,blaster 3 coil,,,the coil,,pickup,,cap,,rotor ,,wires,,plugs are all brand new,,,,,also after it does shut off i really have to crank it to get it to start back up,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,PLEASE HELP

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Coldwater, MI
    do you have a fuel pressure gauge on it ? if so is it loosing pressure when its shutting off ?

    I had a buddy had same issue, everytime his holley black got warm it'd shut off.
    David Lanning
    IHRA NHRA 387B

    Fleenor Racing Transmission
    Lanning Electric
    Complete Drag Car Wiring
    APD Race Engines

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Copyright © 2005-2016 All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy