Results 1 to 3 of 3

Thread: removing ball joints

  1. #1
    Senior Member EXPERT BUILDER
    Join Date
    Nov 2008
    Posts
    263

    removing ball joints

    how the heck do u go about doing this????

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Sep 2007
    Posts
    4,143
    Grind the rivets off (uppers)and either use a BFH or an arbor press on the lowers.

    The new uppers will come with bolts to replace the rivets. Best to have the new lowers pressed in.The BFH is ok to remove the old but may damage the new ones.

  3. #3
    Senior Member DYNO OPERATOR
    Join Date
    Aug 2007
    Location
    Lost Creek, WV
    Posts
    533
    It also depends on what you are working on too. Some of the after market control arms use the old mopar ball joints that thread in.

    TS1955


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy