no spark
03-28-2010, 11:54 AM
Junior Member
APPRENTICE
Thread Starter
Join Date: Feb 2007
Posts: 16
no spark
have msd 7al3 and crank trigger every time a throw my painless ignition switch i blow a fuse what could this be
03-28-2010, 04:24 PM
Senior Member
DYNO OPERATOR
Join Date: Aug 2007
Location: Lost Creek, WV
Posts: 533
Sounds to me you have a dead short somewhere. But the first thing that I would do is make sure everything is wired correctly. Then the best thing to do is get a volt/ohm meter and go through the process of elimination. Check your switch, check wiring making sure you don't have a bare wire. JMO.
TS1955
03-28-2010, 07:44 PM
Senior Member
RACING JUNKIE
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Have you used this system prior to this ?
Is this a brand new system and this is the first you've put juice to it ?
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off