oversize lifters in a BBC
#5
In my 540 BBC it has Isky EZX .904 lifters and your push rods will depend on your deck height and if your heads have been cut. You will need a push rod length checker to determine what length you'll need.
#6
Member
MASTER JOURNEYMAN
Join Date: Aug 2008
Location: Finland
Posts: 46
I'm going to use Comp .904" lifters in my dart big m block but I'm having trouble finding the lifter bushings I have tried to contact CHE to get their bushings same as used in the chevyhiperformance magazine but they don't answer... Where are you guys getting the bushings? I'll probably make my own but it takes alot off time and is not that cheap...
#7
Senior Member
RACING JUNKIE
Join Date: Jan 2006
Location: La.
Posts: 2,890
BHJ makes them and they considerably cheaper than CHE, they'll also answer the phone.
Zip.
http://www.bhjproducts.com/bhj_conte...leeves/lbs.php
Zip.
http://www.bhjproducts.com/bhj_conte...leeves/lbs.php
#9
Member
MASTER JOURNEYMAN
Join Date: Aug 2008
Location: Finland
Posts: 46
Originally Posted by zipper06
BHJ makes them and they considerably cheaper than CHE, they'll also answer the phone.
Zip.
http://www.bhjproducts.com/bhj_conte...leeves/lbs.php
Zip.
http://www.bhjproducts.com/bhj_conte...leeves/lbs.php