Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: oversize lifters in a BBC

  1. #1
    Junior Member APPRENTICE
    Join Date
    Mar 2003
    Location
    Georgia
    Posts
    24

    oversize lifters in a BBC

    I plan to bush the lifter bores in my 2 tall decks, I know some sized them to Chrysler roller lifters.
    What is common these days?

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Location
    Coldwater, MI
    Posts
    2,998
    .903 Lifters seem to be what everyones using now days

  3. #3
    Senior Member EXPERT BUILDER
    Join Date
    Nov 2003
    Location
    NORTHEAST
    Posts
    290
    Quote Originally Posted by hammertime
    .903 Lifters seem to be what everyones using now days
    X2
    WWW.CNCBLOCKSNE.COM
    IS A DIVISION OF
    HINKSON AUTOMOTIVE
    RESEARCH & DEVELOPMENT

    CARL HINKSON 207-892-7215
    EMAIL [email protected]

  4. #4
    Junior Member APPRENTICE
    Join Date
    Mar 2003
    Location
    Georgia
    Posts
    24
    .903 = Chrysler?

    different length pushrod comapred to Chevy?

  5. #5
    Senior Member RACING JUNKIE BEAST477's Avatar
    Join Date
    Feb 2007
    Location
    Michigan
    Posts
    1,908
    In my 540 BBC it has Isky EZX .904 lifters and your push rods will depend on your deck height and if your heads have been cut. You will need a push rod length checker to determine what length you'll need.

  6. #6
    Member MASTER JOURNEYMAN
    Join Date
    Aug 2008
    Location
    Finland
    Posts
    46
    I'm going to use Comp .904" lifters in my dart big m block but I'm having trouble finding the lifter bushings I have tried to contact CHE to get their bushings same as used in the chevyhiperformance magazine but they don't answer... Where are you guys getting the bushings? I'll probably make my own but it takes alot off time and is not that cheap...

  7. #7
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    Location
    La.
    Posts
    2,890
    BHJ makes them and they considerably cheaper than CHE, they'll also answer the phone.

    Zip.

    http://www.bhjproducts.com/bhj_conte...leeves/lbs.php

  8. #8
    Junior Member APPRENTICE
    Join Date
    Mar 2003
    Location
    Georgia
    Posts
    24
    can larger than .904 sleeves be used in a chevy tall deck?

  9. #9
    Member MASTER JOURNEYMAN
    Join Date
    Aug 2008
    Location
    Finland
    Posts
    46
    Quote Originally Posted by zipper06
    BHJ makes them and they considerably cheaper than CHE, they'll also answer the phone.

    Zip.

    http://www.bhjproducts.com/bhj_conte...leeves/lbs.php
    Dang you were rght! they answered and if we can get a reasonable shipping prize I'll take them from there.

  10. #10
    Senior Member EXPERT BUILDER
    Join Date
    Nov 2003
    Location
    NORTHEAST
    Posts
    290
    We machine alot of the .904 lifter bores in both SBC and BBC and rarely do we install bushings when going to the larger lifter bores.
    WWW.CNCBLOCKSNE.COM
    IS A DIVISION OF
    HINKSON AUTOMOTIVE
    RESEARCH & DEVELOPMENT

    CARL HINKSON 207-892-7215
    EMAIL [email protected]


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy