crank choice

Old 03-10-2010, 05:08 PM
  #1  
bigcrunch
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Mar 2003
Location: Georgia
Posts: 24
Default crank choice

13-1 compression, 10-15lbs boost, alcohol fuel

Scat 4340, eagle 4340, gm forged ??

this is for a spare motor, I don't have the fuding for a crower, moldex, bryant,,,,
bigcrunch is offline  
Old 03-10-2010, 05:55 PM
  #2  
gnsrule
Senior Member
SENIOR BUILDER
 
Join Date: Nov 2004
Posts: 118
Default

Ok, I'll bite...
13:1 w/ 15 lbs of boost on alky. Sounds like you really should have the Crower, Moldex, Bryant, etc..

Craig
gnsrule is offline  
Old 03-10-2010, 07:32 PM
  #3  
cepx111
Senior Member
RACING JUNKIE
 
Join Date: May 2006
Posts: 2,044
Default

Ok, bite #2

Is it a big block, small block, ford, chebbie?
cepx111 is offline  
Old 03-10-2010, 08:43 PM
  #4  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

How big is the blower, IE: b/blk or sm/blk, rpm range? From what i've been reading Scat has a better handle on the inspection, although both cranks are the same varity (Chinese)
I've run both in sm/blks with good luck (so far)

Zip.
zipper06 is offline  
Old 03-11-2010, 06:09 AM
  #5  
bigcrunch
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Mar 2003
Location: Georgia
Posts: 24
Default

BBC tall deck, 8/71 with striping and anodized. 6000rpm max on this one.
bigcrunch is offline  
Old 03-11-2010, 06:53 AM
  #6  
bigcrunch
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Mar 2003
Location: Georgia
Posts: 24
Default

Anyone have experience with this brand?

http://www.ohiocrank.com/chevybb_cranks.html
bigcrunch is offline  
Old 03-11-2010, 09:14 AM
  #7  
TS1955
Senior Member
DYNO OPERATOR
 
Join Date: Aug 2007
Location: Lost Creek, WV
Posts: 533
Default

A friend of mine has one in a 526 blown big block chevy. Oddy dynoed it at 2200HP. He has ran it one season so far in a rail buggy.

TS1955
TS1955 is offline  
Old 03-11-2010, 10:32 AM
  #8  
bigcrunch
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Mar 2003
Location: Georgia
Posts: 24
Default

TS1955 which crank the Ohio 4340 or their billet?
bigcrunch is offline  
Old 03-11-2010, 12:01 PM
  #9  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

Originally Posted by bigcrunch
Anyone have experience with this brand?

http://www.ohiocrank.com/chevybb_cranks.html
Same as the Eagle or Scat in the 4340 version ( Chinese imports) although the Billet may be American made.

Here is a couple good reads on crankshafts, i realize they're talking about Chrysler cranks, but incluces all the crankshaft companies.

http://forums.racingjunk.com/viewtopic.php?t=13515

http://www.forabodiesonly.com/mopar/...ad.php?t=90763

Zip.
zipper06 is offline  
Old 03-11-2010, 01:27 PM
  #10  
cncmotorsports
Senior Member
MASTER BUILDER
 
Join Date: Apr 2003
Location: Brookings South Dakota
Posts: 244
Default

Callies Dragon slayer would be just fine for you. USA Made
Depending on your stroke they start at $1050.00

Anything cheaper than this is a Chinese crankshaft
cncmotorsports is offline  

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -