crank choice
03-10-2010, 05:08 PM
Junior Member
APPRENTICE
Thread Starter
Join Date: Mar 2003
Location: Georgia
Posts: 24
crank choice
13-1 compression, 10-15lbs boost, alcohol fuel
Scat 4340, eagle 4340, gm forged ??
this is for a spare motor, I don't have the fuding for a crower, moldex, bryant,,,,
03-10-2010, 05:55 PM
Senior Member
SENIOR BUILDER
Join Date: Nov 2004
Posts: 118
Ok, I'll bite...
13:1 w/ 15 lbs of boost on alky. Sounds like you really should have the Crower, Moldex, Bryant, etc..
Craig
03-10-2010, 07:32 PM
Senior Member
RACING JUNKIE
Join Date: May 2006
Posts: 2,044
Ok, bite #2
Is it a big block, small block, ford, chebbie?
03-10-2010, 08:43 PM
Senior Member
RACING JUNKIE
Join Date: Jan 2006
Location: La.
Posts: 2,890
How big is the blower, IE: b/blk or sm/blk, rpm range? From what i've been reading Scat has a better handle on the inspection, although both cranks are the same varity (Chinese)
I've run both in sm/blks with good luck (so far)
Zip.
03-11-2010, 06:09 AM
Junior Member
APPRENTICE
Thread Starter
Join Date: Mar 2003
Location: Georgia
Posts: 24
BBC tall deck, 8/71 with striping and anodized. 6000rpm max on this one.
03-11-2010, 06:53 AM
Junior Member
APPRENTICE
Thread Starter
Join Date: Mar 2003
Location: Georgia
Posts: 24
03-11-2010, 09:14 AM
Senior Member
DYNO OPERATOR
Join Date: Aug 2007
Location: Lost Creek, WV
Posts: 533
A friend of mine has one in a 526 blown big block chevy. Oddy dynoed it at 2200HP. He has ran it one season so far in a rail buggy.
TS1955
03-11-2010, 10:32 AM
Junior Member
APPRENTICE
Thread Starter
Join Date: Mar 2003
Location: Georgia
Posts: 24
TS1955 which crank the Ohio 4340 or their billet?
03-11-2010, 12:01 PM
03-11-2010, 01:27 PM
Senior Member
MASTER BUILDER
Join Date: Apr 2003
Location: Brookings South Dakota
Posts: 244
Callies Dragon slayer would be just fine for you. USA Made
Depending on your stroke they start at $1050.00
Anything cheaper than this is a Chinese crankshaft