Results 1 to 4 of 4

Thread: unclogging oil passage from filter to sending unit on sbc

  1. #1

    unclogging oil passage from filter to sending unit on sbc

    The oil passage from the filter to the top of the motor is clogged pretty tight. Took adapter off and the wooly type seal was gone and i think it got pushed in the passage. need suggestions on how to get it out.

    thanks

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Apr 2009
    Location
    kingsport tn
    Posts
    1,735
    please do not make 2 threads on same topic when some one has a viable option they will post thanks
    CRIMEDOG
    Sam Wood

  3. #3
    Senior Member RACING JUNKIE mopar1968's Avatar
    Join Date
    Dec 2006
    Location
    Abingdon,Virginia
    Posts
    3,579
    Try compressed air first, shoot down from sending unit first :!: :!:



    ''JUST MY TWO CENT'S WORTH''
    Head's up the true drag race!!

  4. #4
    Senior Member MASTER BUILDER
    Join Date
    Oct 2007
    Location
    Staunton,VA.
    Posts
    249
    plug it off and move to the side of the block just above the filter take out the plug and put youre sending unit (gauge line there)there.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy