need help from knowledgeable Chevy Guy

Old 02-19-2010, 01:00 PM
  #1  
DarylC37770
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Jan 2010
Posts: 3
Default need help from knowledgeable Chevy Guy

Hi,

Building a dirt track car, the rule book says we have to run a stock production replacement piston. Now I think I can get away with a 2 valve relief flat top, but did a 350 ever come out with a dome from the factory? If so what?
DarylC37770 is offline  
Old 02-19-2010, 02:21 PM
  #2  
jmarksdragster
Senior Member
RACING JUNKIE
 
jmarksdragster's Avatar
 
Join Date: Jul 2007
Location: Florida
Posts: 635
Default

70 1/2 Z28, 70 Vette LT1
jmarksdragster is offline  
Old 02-19-2010, 03:12 PM
  #3  
kwkracing
Senior Member
RACING JUNKIE
 
Join Date: Dec 2004
Location: austin texas
Posts: 729
Default

Where are you gonna race at? They dont allow a stock pop up of any kind if you get techd in a sport mod engine. STOCK!
kwkracing is offline  
Old 02-19-2010, 05:20 PM
  #4  
sm44
Junior Member
SHOW GUEST
 
Join Date: Mar 2009
Posts: 8
Default

tell us where it is or give us a link to the track and we can help you out.
sm44 is offline  
Old 02-19-2010, 06:08 PM
  #5  
dragonmaster093
Senior Member
RACING JUNKIE
 
Join Date: Mar 2009
Location: kingsport tn
Posts: 1,729
Default

from my knowledge in my area imca rules hobby stock and sport mod sbc can be .060 bored no more then 9.1 cr and must be flat top, can have valve releifs. stock car and a mod are limited to factory or after market iron block and same on heads and can not have altered motor mounts or lifter location other wise fairly unlimited
dragonmaster093 is offline  
Old 02-22-2010, 06:44 AM
  #6  
DarylC37770
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Jan 2010
Posts: 3
Default

Here are the links to the tracks I am looking at. Look at the rules and let me know what you guys think.
http://www.clayhillmotorsports.com/r...ml#pure_street
http://www.camdenmotorspeedway.com/6.html

Look at the rules for pure street and street stock at both tracks. The rules are very similar. tires and vacuum are the only real difference.
DarylC37770 is offline  
Old 02-22-2010, 09:06 AM
  #7  
dragonmaster093
Senior Member
RACING JUNKIE
 
Join Date: Mar 2009
Location: kingsport tn
Posts: 1,729
Default

Stock 5.7 factory production rod. Dished or flat top 2 or 4 valve relief pistons allowed. Pistons must stay flush with or below top of the block.
that says it all basicaly the short block i have in my monte which is an imca legal short block flat top 9.1 cr .060 4bolt main block
dragonmaster093 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -