using uretheane front suspension parts

Old 02-17-2010, 06:38 PM
  #1  
chevyart
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Mar 2008
Posts: 173
Default using uretheane front suspension parts

would like to know pros and cons about using uretheane (with added graphitE) BALL JOINTS AND UPPER AND LOWER CONTROL ARM BUSHINGS IN MY VEGA HEARD SO MANY BAD STORIES ABOUT THIS PRODUSCT THAT I AM AFRAID TO CONSIDER USINT THESE. THE VEGA PARTS ARE ALMOST NEXT TO IMPOSSIBLE TO FIND AND WAY TOO EXPENSIVE. ANYINFO APPRECIATED CHEVY ART
chevyart is offline  
Old 02-17-2010, 08:14 PM
  #2  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

If it's drag car only, you would be better off useing solid alum or steel bushing, they rotate a lot more freely.

JMO

Zip.
zipper06 is offline  
Old 02-17-2010, 09:19 PM
  #3  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,137
Default

X2 on what Zipper said.

I know a guy that put them in his car,and after he did it you could grab the front end and pull it way up in the air and let go...it wouldn't drop very fast...like they were too tight.
Tod74 is offline  
Old 02-18-2010, 10:52 PM
  #4  
chevyart
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Mar 2008
Posts: 173
Default uretheane front end bushings

thanks guys its a street car and will only see the track once in a while chevy art
chevyart is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -