Rear axle narrowing alignment jigs
08-20-2009, 02:33 PM
Member
MASTER JOURNEYMAN
Thread Starter
Join Date: Oct 2008
Location: Desoto, MO
Posts: 37
Rear axle narrowing alignment jigs
Who all is now making these alignment jigs? Thanks guys.
08-20-2009, 02:44 PM
Senior Member
RACING JUNKIE
Join Date: Feb 2004
Location: san antonio, texas
Posts: 1,233
art morrison, and Chris Alston's Chassisworks sell the alignment
08-20-2009, 03:34 PM
Member
JUNIOR BUILDER
Join Date: Aug 2004
Posts: 96
jig
if your looking fo jig to shorten rearends just make it yourself its cheap and its really easy to make and just as accurate as theres
08-20-2009, 04:54 PM
Member
MASTER JOURNEYMAN
Thread Starter
Join Date: Oct 2008
Location: Desoto, MO
Posts: 37
Re: jig
Quote:
Originally Posted by promod45
if your looking fo jig to shorten rearends just make it yourself its cheap and its really easy to make and just as accurate as theres
I would, but I don't have access to a decent lathe anymore.
08-20-2009, 08:22 PM
Senior Member
RACING JUNKIE
Join Date: Dec 2004
Location: austin texas
Posts: 729
i just looked and the alston on is not bad...450 bucks! You really can beat that if you dont have a lathe. I dont know why they dont put marks for measureing axle length on the center plates? Oh well i guess just subtact about a 1.125" from pinion center line. I also like my homemade one that uses a actuall carrier to center off of and not a plate like theres. Good luck.
08-21-2009, 03:26 AM
Senior Member
DYNO OPERATOR
Join Date: Feb 2009
Posts: 510
I have actually used the axle in one case to line it up. Car still running and going straight.
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
08-20-2009, 04:54 PM
Re: jig
