Supercharger REPAIR?
#1
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Mar 2003
Location: Fountain,MICHIGAN
Posts: 856
Supercharger REPAIR?
Do Any of you Guys know of a Repair Service Here in Michigan,that can handle servicing a Weiand (GAS) Supercharger?
It will NEED someone that can do MORE than a strip Job?It has some Issues in the Gear and Rotor Department?
Seems that it was apart before and Patched up?It had a Weird NOISE when Running(Gear Grinding)?
It DOES NOT Spin Smooth?
I have a # of a Fellow in the Indy Area that use to Work for,Prudome?But,i have yet to Reach Him?
Let me know if you know of Someone?
THANKS
Greg 8)
[email protected]
It will NEED someone that can do MORE than a strip Job?It has some Issues in the Gear and Rotor Department?
Seems that it was apart before and Patched up?It had a Weird NOISE when Running(Gear Grinding)?
It DOES NOT Spin Smooth?
I have a # of a Fellow in the Indy Area that use to Work for,Prudome?But,i have yet to Reach Him?
Let me know if you know of Someone?
THANKS
Greg 8)
[email protected]
#2
Senior Member
RACING JUNKIE
Join Date: Dec 2004
Location: austin texas
Posts: 729
Some one probably took it apart and did not shim it properly, so the rotors clashed a lil, then galled the aluminum abit making it hard to turn and sound like that. I dont know anyone in your area... sorry
#3
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Location: Belleville, IL
Posts: 658
Nobody that I know of in Michigan...
You might try http://www.dyersblowers.com/
They're up in Chicago.
Could also try Oddy's in New York.
http://www.oddysracingengines.com/oddy_contact_us.html
Otherwise, probably the best place to send it would be RBS Superchrgers in Cali.
http://rbssuperchargers.com/
If it's run improperly, assuming the rotors didn't touch the case, the rotors are more than likely junk. Have any photos?
You might try http://www.dyersblowers.com/
They're up in Chicago.
Could also try Oddy's in New York.
http://www.oddysracingengines.com/oddy_contact_us.html
Otherwise, probably the best place to send it would be RBS Superchrgers in Cali.
http://rbssuperchargers.com/
If it's run improperly, assuming the rotors didn't touch the case, the rotors are more than likely junk. Have any photos?
#5
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Mar 2003
Location: Fountain,MICHIGAN
Posts: 856
>?
Thanks for the responces!
I Know all about RBS.Dyers,ODDy and so on?Its a STREET Deal unstripped.I found a fellow in Kankakee,Il.
I'll run it down there and see what can be done with it?
NO PICTURES?
The Previous Owner Deffinately should have Kept his Day Job?
He worked at the Corner Grosery Store,in the MEAT DEPARTMENT.......!
Later
G 8)
I Know all about RBS.Dyers,ODDy and so on?Its a STREET Deal unstripped.I found a fellow in Kankakee,Il.
I'll run it down there and see what can be done with it?
NO PICTURES?
The Previous Owner Deffinately should have Kept his Day Job?
He worked at the Corner Grosery Store,in the MEAT DEPARTMENT.......!
Later
G 8)
#9
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Mar 2003
Location: Fountain,MICHIGAN
Posts: 856
Blowers
Originally Posted by kwkracing
Well what was ur diagnosis?
The Gears on the Frt.Rotors had been,Beat on as He said and Realy BOGGERED up the Splines on the Rotors.The Gears were Actually Junk,along with being out of Time,New Bearings,ETC...!
Also had a bunch of Stripped Holes in the Case that were Repaired.So,its all GOOD Now!
Later
G 8)
#10
Junior Member
SHOW GUEST
Join Date: Mar 2008
Posts: 2
repair
I know you already found someone, but for future reference, Don Gerardot outside of Ft Wayne Indiana does blower repair. Might be a little closer for some guys. http://www.gerardot.com/